Meter Selection Utility


Answer nine simple questions about your application to find the exact meter you need.
Don't know the answer to some of the questions? Just fill out what you know!

Displaying 111 total products (page 7 of 12):

  • The ProVu PD6310 is an 1/8 DIN pulse input (NPN, PNP, TTL, switch contact, sine wave, etc.) digital batch controller specifically designed for single and multi-stage batching applications. It provides excellent but simple batch control capabilities with features such as preclose relays and automatic overrun correction for more accurate batches and intuitive front panel buttons for simple operation and menu navigation. The preclose deactivates a specific relay on the batch controller before the batch is finished in order to allow slower fill rates and increased accuracy. Automatic overrun correction keeps the batch size accurate over time and with system wear. With expansion module relays, up to eight-stage batching is possible; each additional stage-batching relay has an individually programmable preclose amount. Like all ProVu meters, the PD6310 batcher includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options.

    Why you should buy:
    • Single or Multi-Stage Batching
    • Pulse Input
    • Displays Batch and Rate
  • The Vantageview PD6770 is a plastic, loop-powered process meter with 1" display digits in a field-mountable enclosure designed for demanding applications. The meter derives all of its power from the 4-20 mA loop with a small 1 V drop, so there is no need to run additional, costly power lines. The PD6770 is built in a NEMA 4X and IP65 rated plastic enclosure which can stand up to even the harshest environmental conditions. It is programmed using four easy-to-access, front-mounted control dials.




    Why you should buy:
    • NEMA 4X/IP65 Enclosure
    • Loop-Powered
    • Large Digits
    • Backlight Option
  • The ProVu PD6310-WM is an NTEP® certified, pulse input (NPN, PNP, TTL, switch contact, sine wave, etc.) digital batch controller specifically designed for single and multi-stage batching applications which has been certified as a Weighing and Measuring device. These versatile NTEP certified batch controllers provide excellent but simple batch control capabilities with features such as preclose relays and automatic overrun correction for more accurate batches and intuitive front panel buttons for simple operation and menu navigation. This Weights and Measures approved batch controller is equipped with a mechanically secured, tamper-proof, programming lockout feature. This consists of a cable with a compression seal that is used to prevent access to a programming lockout jumper. Like all ProVu meters, the PD6310 includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options.

    Why you should buy:
    • NTEP Weights & Measures Batch Controller
    • Pulse Input
    • Displays Batch and Rate
  • The ProtEX-MAX PD8-6060 process meter offers all the functionality of the ProVu PD6060 as a CSA, ATEX, and IECEx certified explosion-proof product. It is available in an aluminum or stainless steel enclosure and will operate over a wide temperature range of -55 to 65°C (-67 to 149°F). It accepts two inputs of either a process current (4-20 mA) or process voltage (0-5V, 1-5V, etc.) signal. It displays these signals on a dual-line, 6-digit Sunbright sunlight readable display. The meter can be customized such that these two inputs are displayed in a variety of ways, including both at the same time with tags or the result of math functions performed on one or both of the inputs. The PD8-6060 can be equipped with four internal relays and a 4-20 mA analog output. It can be programmed and operated without opening the housing by using the built-in CapTouch through-glass buttons or the RS-485 serial communication port with free Modbus protocol.

    Why you should buy:
  • The PD6363 is a member of the ProVu series of 1/8 DIN digital panel meters that is specifically designed to display flow rate and total from two (2) pulse output (NPN, PNP, TTL, switch contact, sine wave, etc.) flowmeters. It displays these signals on a dual-line, 6-digit display that is available with optional Sunbright® sunlight readable LEDs. The dual-line display can be used to show both flow rates simultaneously, to alternate between the two inputs showing both the flow rate and total of each, or to show the result of math functions performed on the flow rates and totals. Like all ProVu meters, the PD6363 includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options. ProVu meters can be equipped with up to four internal relays, a 4-20 mA output, and Modbus® RTU serial communications. The PD6363 dual-input flow rate/totalizer includes a 24 VDC power supply to drive the flowmeter and can be programmed via the front panel pushbuttons or free MeterView® Pro software.

    Why you should buy:
  • The PD662 NEMA 4X, CSA Certified loop-powered meter is perfect
    for applications where a simple, inexpensive display is required
    and AC power is not available. The PD662 derives all its power
    from the 4-20 mA loop, including its optional backlight feature. It
    can be easily scaled in the field using four push buttons; with or
    without applying an actual calibration signal. The PD662’s display
    will read up to 2999; we call this 3½+ digits! The PD662 is housed
    in a rugged NEMA 4X enclosure and is provided with one ½" NPT
    pipe conduit hole.


    Why you should buy:
  • The PD659 series includes DIN mountable models for signal isolation, splitting and conditioning of 4-20 mA and 0-10 VDC signals. As signal isolators, they provide a convenient way to isolate the input signal from the power source and output signal. As splitters, they split one 4-20 mA input into two isolated 4-20 mA outputs. As signal conditioners, they convert either a 4-20 mA input to a 0-10 VDC output or a 0-10 VDC input to a 4-20 mA output.
  • The PDD9000 ConsoliDator+ demonstrator has everything you need to show off all its great features. This versatile multi-channel controller comes with a signal generator, so you can simulate almost any application and see it in action. The PDD9000 demo is also equipped with a light/horn on the top of the unit to show indication of alarming conditions. Simply connect the demo unit to a PC with the included USB cable and utilize the free ConsoliDator+ configuration software. The PDD9000 demo has built-in feet to stabilize the unit while showing it. It also has a protective carrying case making it convenient and easy for transporting around.

    Demo Kit Includes: PDD9000 ConsoliDator+ multivariable controller, PD9502 signal generator, PDA-LH light/horn, USB cable for software PC connection, Ethernet cable for internet, built-in feet for stability, and protective storage case

  • The Vigilante® II PD150 alarm annunciator provides alarming and monitoring capabilities for all of your level, pressure, flow, and other process switches. These alarm annunciators are available in two models; the PD154 has four (4) inputs and the PD158 has eight (8) inputs. Each model accepts inputs from relays, float switches, digital outputs, and many other discrete (on/off) devices. It can be field programmed for all common ISA alarm sequences including first out indication and provide alarm signaling through front panel LEDs and a built in 85 dB horn. It features a NEMA 4X front, 2 SPDT relays for alarm activated devices, wide operating temperature range, and sunlight viewable alarm indicators. Custom printed message labels can be included with your order at no additional charge.

    PD154
    Why you should buy:
    • 1/8 DIN Panel Mount
    • 4 or 8-Point Monitoring
    • All Common ISA Sequences
  • The PDA18DINSH Sun Hood improves the readability of 1/8 DIN digital panel meters when they are mounted in direct sunlight by shading the instrument from the sun. The Sun Hood is made from 18 gauge 316 stainless steel and mounts between the 1/8 DIN digital panel meter and the panel. In addition, a gasket is provided that installs between the Sun Hood and the panel to provide a NEMA 4X seal to the panel. The whole assembly is held in place by the panel meter’s mounting brackets.