Precision Digital Logo

Meter Selection Utility


Answer nine simple questions about your application to find the exact meter you need.
Don't know the answer to some of the questions? Just fill out what you know!

Sunlight Readable Display Low Voltage Indoor 4 Digits Explosion-Proof 5 Digits

Displaying 3 total products (page 1 of 1):

  • PD6830 ProtEX-RTP Explosion-Proof Pulse Input Flow Rate/Totalizer

    The ProtEX-RTP PD6830 is an explosion-proof flow rate/totalizer that can display flow rate and total from a pulse output flowmeter. Its display has a five digit upper line for rate, a seven alpha-numeric character lower line for total, and comes standard with a backlight.

    The ProtEX-RTP carries all major approvals including:

    •  FM Approved as Explosion-Proof / Dust Ignition-Proof / Flame-Proof •  CSA Certified as Explosion-Proof / Dust Ignition-Proof / Flame-Proof •  ATEX and IECEx Certified as Explosion-Proof

    It can be powered from an included battery or a 24 VDC external power supply. Some features that really make the PD6830 flow rate/totalizer stand out are its automatic unit conversions from flowmeter k-factor units, ability to log up to 1024 data points, and SafeTouch through-glass buttons. These buttons allow the PD6830 to be programmed and operated through the glass, thus eliminating the need to remove the cover in a hazardous area.

    Why you should buy:
  • PD6830X ProtEX-MFI Explosion-Proof Modbus Scanner

    The ProtEX PD6830X is an explosion-proof, RS485 serial input Modbus® RTU scanner capable of scanning up to 16 Modbus variables and displaying them on an easy-to-read, dual-line, LCD display. This Modbus scanner can be programmed as a Modbus RTU master, slave, or snooper. The PD6830X is available in two upper display line configurations: 5-digit decimal display and feet & inches display with bar graph. The lower line is the same for both versions and consists of seven alphanumeric characters.

    The ProtEX PD6830X carries all major approvals including:

    •  FM Approved as Explosion-Proof / Dust Ignition-Proof / Flame-Proof •  CSA Certified as Explosion-Proof / Dust Ignition-Proof / Flame-Proof •  ATEX and IECEx Certified as Explosion-Proof

    Two features that really make the PD6830X stand out are its wide viewing angle display and SafeTouch through-glass buttons. These buttons allow the PD6830X to be programmed and operated through the glass, thus eliminating the need to remove the cover in a hazardous area.

    Why you should buy:
  • PD8-765 ProtEX-MAX Explosion-Proof Process and Temperature Meter

    The ProtEX-MAX PD8-765 explosion-proof, large-display, process and temperature meter offers all the functionality of the Trident X2 as a CSA, ATEX, and IECEx certified explosion-proof product. It is available in an aluminum or stainless steel enclosure and will operate over a wide temperature range of -55 to 65°C (-67 to 149°F). PD8-765's huge 1.2" (30.5 mm) sunlight readable display that is visible from over 30 feet away. This explosion-proof indicator can be field programmed to accept process voltage (0-5 V, 1-5 V, etc.) and current (4-20 mA) inputs, 100 Ohm RTDs, and the four most common thermocouples. The intensity of the display can be adjusted to compensate for various lighting conditions, including direct sunlight. The meter can be programmed and operated without opening the housing by using the built-in CapTouch through-glass buttons or the RS-485 serial communication port with free Modbus protocol. Options for the PD8-765 process and temperature indicator include 2 relays, a 4-20 mA output, and a 24 V transmitter power supply.

    Why you should buy: