Precision Digital Logo

Field Mounted Indicators Pulse IECEx (IS, XP)

Field Mounted Indicators
Precision Digital manufactures a wide range of field-mounted indicators and controllers that are suitable for harsh and hazardous environments. They can be easily mounted to pipes, walls and other surfaces in your facility, inside or outdoors. These meters feature either rugged NEMA 4X safe area enclosures or FM, CSA, ATEX, IECEx approved explosion-proof enclosures. Field mounted loop-powered meters can be installed in areas with limited access to additional power because they derive their power from the 4-20 mA loop. Many of these meters feature large digits and sunlight readable, wide angle displays.

Field Mounted Indicators Pulse IECEx (IS, XP)

  • PD6938-HA ProtEX+ Pulse Input Explosion-Proof & Intrinsically Safe Flow Rate/Totalizer

    The PD6938 ProtEX+ pulse input flow rate/totalizers can be installed in a variety of areas (hazardous, dirty, wet, corrosive, hot, or cold) to provide convenient and informative display of flow rate and total from any pulse output flowmeter. These instruments will accept a variety of pulse inputs, including slow pulse rates. They can be powered from a 9-30 VDC power supply or the 4-20 mA output loop, have on-board datalogging capabilities, come with explosion-proof and intrinsically safe approvals, and can be ordered with optional 4-20 mA output and two relays. The PD6938, with the addition of its two optional relays, can also be used as a simple batch controller.

    The ProtEX+ carries all major approvals including:

    •  UL Listed as Explosion-Proof / Dust Ignition-Proof / Flame-Proof
    •  CSA Certified as Explosion-Proof / Dust Ignition-Proof / Flame-Proof
    •  ATEX and IECEx Certified as Intrinsically Safe / Explosion-Proof

    The PD6938 can operate down to -40°C and is certified by the agencies to be installed in areas that get as cold as -55°C.

    The PD6938 ProtEX+ is available in aluminum and stainless steel enclosures that are designed for easy use and installation. The process connection is available in M20, 3/4" NPT and 1" NPT and there are two other conduit holes for field wiring.

    Free, PC-based, MeterView XL software that connects to the meter via a micro-USB cable is available for programming and setup of the instruments. Four CapTouch through-window buttons are available to operate the instrument without removing the cover.

    All models come equipped with two open collector outputs and a digital input. There are also models available with Modbus RTU RS-485 communications, two solid-state relays, and isolated 4-20 mA analog output options.

    Why you should buy:
    • Dual-Line Backlit LCD Display
    • Operate to -40°C; Install to -55°C
    • Pulse Input Rate / Totalizer
    • Display Rate & Total Simultaneously
    • Explosion-Proof & Intrinsically Safe
    • Aluminum & Stainless Steel Enclosures
    • Flashing Red Display / Message on Alarm
    • CapTouch Through-Window Programming
    • Free Programming Software
    • Discrete and Analog Output Options