Precision Digital Logo

Large Display

  • PD2-6080 Helios Modbus Scanner with Dual Analog Inputs

    Go with the Helios PD2-6080 when you have multiple, (up to 16), Modbus registers you want to display on a single large display meter. The PD2-6080 can also accept two 4-20 mA signals. The PD2-6080 can be programmed as a Modbus RTU Master, Slave or Snooper allowing it to work in just about any Modbus application. Typically, the upper line displays the PV and the lower line displays the tag.

     

     

     

     

    Why you should buy:
  • PD2-6081 Helios Feet & Inches Modbus Scanner with Dual Analog Inputs

    Go with the Helios PD2-6081 when you have a level application involving Modbus signals and you prefer to display in feet and inches instead of the more common decimal format. The PD2-6081 can display up to 16 modbus registers so a typical application might be 16 tank levels, 8 tank levels and 8 interface levels, or 5 tank levels, 5 interface levels and 5 temperatures. The PD2-6081 makes a great outdoor tank side indicator because its display is bright enough to read in direct sunlight and it will operate from -40 to 150°F.

     

     

     

    Why you should buy:
  • PD2-6363 Helios Dual Pulse Input Flow Rate/Totalizer

    Go with the Helios PD2-6363 when you want to display two pulse flowmeter inputs on one meter you can see from a distance. Both of these inputs can be displayed on six full digits and each flowmeter is provided with its own DC power supply. The PD2-6363 can also perform a variety of math functions on those two inputs, such as computing the difference between them or summing them together. One application for the PD6363 is determining fuel consumption by computing the difference between two flowmeter inputs.

     

     

    Why you should buy:
    • Large Dual Line Display
    • Dual Pulse Rate Inputs
    • Math Functions
  • PDS178 Watchdog Scanner Temperature & Process System

    The PDS178 Watchdog Temperature Scanning & Alarming System brings together a popular combination of Precision Digital products: the Trident meter, the Minimux II scanner, and the PDA2821 NEMA 4X enclosure. The scanner automatically switches between up to eight (8) input signals (4-20 ma, ±10 V, TC, or RTD) and sends them to the Trident meter for display. Signal switching is done via DPST reed relays. The Watchdog can be used in a variety of temperature and process monitoring applications. A very common application for this system is to monitor bearing temperatures. The Trident meter included with this system is available with standard 0.56" (14.2 mm) high LED digits or large 1.2" (30.5 mm) high LEDs.

  • PD2-6400 Helios High Voltage & Current Meter

    Go with the Helios PD2-6400 when you want to display voltage and current on one large display meter you can see from a distance. The PD2-6400 can even compute and display apparent power by multiplying the two inputs together.

     

     

     

     

     

    Why you should buy:
    • Large Dual Line Display
    • High Current & High Voltage Inputs
  • PD655 Plastic NEMA 4X Process Meter With 1.0" Display

    The PD655 is a large display, analog input process meter with flow rate/totalizer and batch control capabilities housed in a rugged, impact-resistant, glass-filled, polycarbonate NEMA 4X enclosure. Each accepts the common process signals such as 4-20 mA, 0-5 VDC, 1-5 VDC and 0-10 VDC and displays these signals in engineering units on a large, high efficiency, 4 1/2 digit LED display. The meter also provide two isolated 24 V power supplies to drive both the input and output loops. Options include up to 4 relays for alarm or batch control and an isolated 4-20 mA transmitter output.