- The PDA2360 series of plastic control stations provide a convenient way to remotely control devices such as Precision Digital’s digital meters and controllers. For instance, there is a four-position control station that mimics the ProVu and Helios’s four buttons: Menu, Right Arrow, Up Arrow, and Enter. There are other control stations that can be used to reset the total, acknowledge relays, set a tare, and run a batch process. There are even control stations with no text on the buttons that can be used for any purpose the user requires. An emergency stop control station is also available. The control stations come pre-assembled with 1 to 4 Normally Open (NO) red, green, yellow, or black pushbuttons. Knockouts on the top and bottom of the enclosure are provided for convenient wiring and two mounting holes on the back of the enclosure make it easy for wall mounting.
The PDA8006 Trident USB serial adapter is the perfect adapter to use with the Trident when the only serial communication required is for MeterView running on a PC. It is the least costly option as well. USB and meter to adapter cables are included.
- The PDA1000 is simple panel mounted buzzer and light that provides a convenient way to indicate alarm conditions on Precision Digial meters and other devices.
PDA-SSTAG is a laser etched stainless steel tag accessory for any of your precision digital meters. The tag features custom text for equipment identification, instruction, or whatever else is needed in your facility. Each tag comes with a stainless steel wire and lead seal for easy mounting wherever you need it.
Digital input button used as an alarm reset in conjunction with Precision Digital's meters.
The Loop Leader+ loop-powered large display meters can be installed virtually anywhere to provide convenient and informative display of any 4-20 mA signal. One of the most convenient features of these instruments is their large, dual line display. The 2.8" 5-digit top display is used to display the process variable while the 1.5" 8-character alphanumeric bottom display can be used to display the units of measure or a tag. Feet and inches models display level in feet and inches on the top display while the 8-digit alphanumeric bottom line may be used to display a tag or custom message.
Further enhancing the display on these instruments is a 20-segment bargraph that also includes a numeric value of the percentage the bargraph represents. Free, PC-based, MeterView XL software that connects to the meter via a micro USB cable is available for programming and setup of the meters.
The PD4 is available in two configurations: Display only and with two solid-state relays and 4-20 mA analog output. All models come equipped with two open collector outputs and remote contacts. The open collector outputs are useful for alarm indication. The remote contacts can be used to remotely operate the four programming buttons, to acknowledge the relays, to start/stop a timer/stopwatch, and more. The relays can be programmed for alarm indication, on/off control, or pump alternation.
Finally, there are intrinsically safe versions of these instruments that can be installed in hazardous areas.
Why you should buy:- 2.8" Dual-Line Backlit LCD Display
- Loop-Powered
- Flashing Red Display / Message on Alarm
- Free Programming Software
- Bargraph or Feet & Inches Display
- Discrete and Analog Output Options
The Loop Leader+ loop-powered large display meters
can be installed virtually anywhere to provide convenient
and informative display of any 4-20 mA signal. One of
the most convenient features of these instruments is their
large, dual line display. The 2.8" 5-digit top display is used
to display the process variable while the 1.5" 8-character
alphanumeric bottom display can be used to display the
units of measure or a tag. Feet and inches models display
level in feet and inches on the top display while the 8-digit
alphanumeric bottom line may be used to display a tag or
custom message.Further enhancing the display on these instruments is a
20-segment bargraph that also includes a numeric value of
the percentage the bargraph represents.
Free, PC-based, MeterView XL software that connects
to the meter via a micro USB cable is available for
programming and setup of the meters.The PD4 is available in two configurations: Display only
and with two solid-state relays and 4-20 mA analog output.
All models come equipped with two open collector outputs
and remote contacts. The open collector outputs are
useful for alarm indication. The remote contacts can be
used to remotely operate the four programming buttons, to
acknowledge the relays, to start/stop a timer/stopwatch, and
more. The relays can be programmed for alarm indication,
on/off control, or pump alternation.Finally, there are intrinsically safe versions of these
instruments that can be installed in hazardous areas.Why you should buy:- 2.8" Dual-Line Backlit LCD Display
- Loop-Powered
- Intrinsically Safe
- Flashing Red Display / Message on Alarm
- Free Programming Software
- Bargraph or Feet & Inches Display
- Discrete and Analog Output Options
The PDA1500 High VAC/VDC to Logic Level Converter is an easy to use DIN rail mounted device for converting high voltage signals into logic level signals for use as a digital input to a wide range of process control and display equipment.
The PD6001 is a member of the ProVu series of 1/8 DIN digital panel meters specifically designed to display level in feet and inches, instead of the usual decimal format. The PD6001 accepts a process current (4-20 mA) or process voltage (0-5V, 1-5V, etc.) signal and displays that signal on a dual line display with convenient feet and inches designations on the upper line. The upper display can even read fractions of an inch in 8ths or 16ths. The lower line can be used to indicate a tag or to display the input in another scale, such as volume in gallons or liters. Like all ProVu meters, the PD6001 includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options. ProVu meters can be equipped with up to four internal relays, a 4-20 mA output and Modbus® serial communications. The PD6001 includes a 24 VDC power supply to drive the transmitter and can be programmed via the front panel pushbuttons or free MeterView® Pro software.
Why you should buy:- Feet and Inches Display
- Pump Alternation
- USB Programming
The PD6200 is a member of the ProVu series of 1/8 DIN digital panel meters that is specifically designed to display flow rate and total from an analog output (4-20 mA, 0-5 V, 1-5 V, etc.) flowmeter. It displays that signal on a dual-line, 6-digit display that is available with optional Sunbright® sunlight readable LEDs. Flow rate is typically displayed on the upper line and the cumulative total is displayed on the lower line. The total overflow feature allows up to a 9-digit total and grand total to be displayed. Like all ProVu meters, the PD6200 includes UL / C-UL listing and CE marking, a NEMA 4X front, and AC or DC power options. ProVu meters can be equipped with up to four internal relays, a 4-20 mA output, and Modbus® RTU serial communications. The PD6200 includes a 24 VDC power supply to drive the flowmeter and can be programmed via the front panel pushbuttons or free MeterView® Pro software.
Why you should buy:- Displays Flow Rate and Total
- Analog Input
- USB Programming