Meter Selection Utility


Answer nine simple questions about your application to find the exact meter you need.
Don't know the answer to some of the questions? Just fill out what you know!

Panel Mount LCD

Displaying 7 total products (page 1 of 1):

  • The Loop Leader PD6620 is a loop-powered, 1/8 DIN flow rate/totalizer designed for demanding process control applications. A dual-line display featuring five digits on the top line and eight digits on the bottom line, preprogrammed engineering units, loop-powered backlight with a unique red backlight option for alarm conditions, and optional bargraph display (PD6624) provide a clear and attractive presentation of the process. All models come equipped with two open collector outputs and are available with two solid state relays and a 4-20 mA analog output. These outputs can be programmed for alarm indication, signal retransmission via pulse or analog signal, pump control, and a number of other useful features. The fact that this meter is loop-powered means that there is no need to run additional, costly power lines; the meter gets all of the power it needs from the 4-20 mA loop. The Loop Leader loop-powered rate/totalizer is built in a shallow-depth case with a IP65 front and features loop-powered backlighting and a wide -40 to 167°F (-40 to 75°C) operating temperature range. It doesn't matter if it's indoors or outdoors, in bright sunlight or a dimly lit plant, or in an area that is wet, dirty, hot, or cold, the Loop Leader can go just about anywhere.

    PD6622
    Why you should buy:
    • Loop-Powered Rate/Totalizer
    • Bargraph Display (Optional)
    • 1/8 DIN Panel Mount
    • Open Collector Outputs Standard
    • Solid State Relays (Optional)
    • 4-20 mA Output (Optional)
  • The Loop Leader PD6600 is a general-purpose, loop-powered, 1/8 DIN process meter. A dual-line display featuring five digits on the top line and eight digits on the bottom line, preprogrammed engineering units, loop-powered backlight with a unique red backlight option for alarm conditions, and optional bargraph display (PD6604) or feet & inches display (PD6603) provide a clear and attractive presentation of the process. All models come equipped with two open collector outputs and are available with two solid state relays and a 4-20 mA analog output. These outputs can be programmed for alarm indication, signal retransmission via pulse or analog signal, pump control, and a number of other useful features. The fact that this meter is loop-powered means that there is no need to run additional, costly power lines; the meter gets all of the power it needs from the 4-20 mA loop. The Loop Leader loop-powered process meter is built in a shallow-depth case with a IP65 front and features loop-powered backlighting and a wide -40 to 167°F (-40 to 75°C) operating temperature range. It doesn't matter if it's indoors or out-doors, in bright sunlight or a dimly lit plant, or in an area that is wet, dirty, hot, or cold, the Loop Leader can go just about anywhere.

    Why you should buy:
    • Loop-Powered Process Meter
    • Bargraph or Feet & Inches Display (Optional)
    • 1/8 DIN Panel Mount
    • Open Collector Outputs Standard
    • Solid State Relays (Optional)
    • 4-20 mA Output (Optional)
  • The Loop Leader PD683 is a loop-powered, 1/8 DIN digital panel meter designed for demanding process control applications. The fact that this meter is loop-powered means that there is no need to run additional, costly power lines; the meter gets all of the power it needs from the 4-20 mA loop. The PD683 loop-powered indicator is built in a shallow-depth case with an FM Type 4X front and features loop-powered backlighting and a wide -30 to 65°C operating temperature range. It doesn't matter if it's indoors or outdoors, in bright sunlight or a dimly lit plant, or in an area that is wet, dirty, hot, or cold, the Loop Leader can go just about anywhere.

     

    Why you should buy:
    • Loop-Powered
    • Bargraph Display
    • 1/8 DIN Panel Mount
    • NEMA 4X/IP65 Front
  • The Loop Leader PD688 is an Intrinsically Safe and Nonincendive, loop-powered, 1/8 DIN digital panel meter designed for hazardous process control applications. The fact that this meter is loop-powered means that there is no need to run additional, costly power lines into a hazardous area; the meter gets all of the power it needs from the 4-20 mA loop. The PD688 loop-powered indicator is built in a shallow-depth case with an FM Type 4X front and features loop-powered backlighting and a wide -30 to 65°C operating temperature range. It doesn't matter if it's indoors or outdoors, in bright sunlight or a dimly lit plant, or in an area that is wet, dirty, hot, or cold, the Loop Leader can go just about anywhere. The PD688 can be installed in just about any hazardous area environment under the FM, CSA, and ATEX standards.

    Why you should buy:
  • The Loop Leader PD684 is a loop-powered, 1/8 DIN flow rate/totalizer designed for demanding process control applications. The fact that this meter is loop-powered means that there is no need to run additional, costly power lines; the meter gets all of the power it needs from the 4-20 mA loop. The PD684 loop-powered rate/totalizer is built in a shallow-depth case with an FM Type 4X front and features loop-powered backlighting and a wide -30 to 65°C operating temperature range. It doesn't matter if it's indoors or outdoors, in bright sunlight or a dimly lit plant, or in an area that is wet, dirty, hot, or cold, the Loop Leader can go just about anywhere.

     

    Why you should buy:
    • Loop-Powered
    • 1/8 DIN Panel Mount
    • NEMA 4X/IP65 Front
    • Rate/Totalizer
  • The Loop Leader PD689 is an Intrinsically Safe and Nonincendive, loop-powered, 1/8 DIN flow rate/totalizer designed for hazardous process control applications. The fact that this meter is loop-powered means that there is no need to run additional, costly power lines into a hazardous area; the meter gets all of the power it needs from the 4-20 mA loop. The PD689 loop-powered rate/totalizer is built in a shallow-depth case with an FM Type 4X front and features loop-powered backlighting and a wide -30 to 65°C operating temperature range. It doesn't matter if it's indoors or outdoors, in bright sunlight or a dimly lit plant, or in an area that is wet, dirty, hot, or cold, the Loop Leader can go just about anywhere. The PD689 can be installed in just about any hazardous area environment under the FM, CSA, and ATEX standards.

    Why you should buy:
  • The ConsoliDator® PD900 is an easy-to-use, multi-channel controller that accepts up to eight (8) 4-20 mA inputs, four (4) flowmeter pulse inputs, and up to eight (8) digital inputs, then displays them on a large, backlit, graphical LCD screen. It is available in four models: the PD940 (4 input, wall mount), the PD941 (4 input, panel mount), PD980 (8 input, wall mount), and the PD981 (8 input, panel mount). While programming the meter, onscreen soft keys appropriately and clearly relabel the action of the front panel buttons making menu navigation quick and simple. In operating mode, the ConsoliDator’s main screen displays all the inputs in both numeric and bar graph format and its individual screens display detailed information about each. The ConsoliDator is suitable for all safe area monitoring and controlling applications such as flow, level, pressure, temperature, and vibration. The availability of Modbus® RTU serial communications makes it ideal for SCADA applications.

    PD940
    Why you should buy:
    • Accepts Analog, Pulse, and Digital Inputs
    • Displays as Numbers and Bargraph