Model: PDA2703-2

PDA2700 Series Steel NEMA 4 Enclosures

UL Listing Canadian Standards Association
SKU: PDA2703-2
Product Type: NEMA 4 Enclosure
Materials: Painted Steel
Cutouts: Two (2)
Meter Mounting: Through front panel
Orientation: Horizontal
Approvals: CSA (Electric Safety), UL/C-UL
Warranty: 1 year
Product Family: PDA2700
Product category: Enclosures
Product Application: Enclosures
Cover Method: Hinge / Screw
Cutout DIN Size: 1/8 DIN
Applicable Meter Types: C

Features

  • House up to 6 Meters
  • 16-Gauge Type 304 Steel
  • 14-Gauge Type 304 Steel
  • 1/8 DIN Cutout(s) Pre-Cut
  • Horizontal, Vertical, or No Cutouts
  • NEMA 4, 12 and 13
  • Cover Secured with Screwed Latches
  • Hinged Door
  • Meter Mounted in Cover
  • Sub-Panels Available
  • Mounting Holes Integral to Enclosure
  • PDA1024-01 24 VDC Power Supply Available
  • UL Listed, CSA Certified
  • Light / Horn & Reset Button

Overview

The PDA2700 series of steel NEMA 4X enclosures for 1/8 DIN Digital Panel Meters provide a convenient way to mount up to six Precision Digital meters to walls and other vertical structures. Many of these enclosures also have room for additional devices like a light / horn and a 24 V transmitter power supply. These enclosures come pre-cut with horizontal or vertical 1/8 DIN cutouts or they can be ordered with no cutouts. The meters are mounted in the door of the enclosure thus allowing for programming and operation of the meter. No additional mounting hardware other than screws is needed. The door is hinged and secured with latches. Enclosures, meters and accessories are ordered and packaged separately.

Wall Mounting

The PDA2700 enclosures include integral mounting flanges attached at the top and bottom of the enclosure that can be used to mount the enclosures to a wall.

Wall mounting

Mounting flange for wall mounting

Cover Securing Method

The cover is secured in place with screwed latches.

Cover Securing Method

Accessories

Sub-Panels

Sub-Panels

The PDP2503 & PDP2504 sub-panels provide a convenient way to mount additional items to the base of the enclosure. They can be drilled to accept screws for easy mounting of relays, contactors, securing wiring clips, or installing other internal devices. See chart below for compatibility.

Sub-Panel Specifications

Size:
PDP2503: 8.75" × 6.88"
(222 mm × 175 mm)
PDP2504: 10.75" × 10.88"
(273 mm × 276 mm)
Thickness: 14 gauge
Material: Steel
Mounting hardware is included.

ModelPDP2503PDP2504
Horizontal Cutouts
PDA2701
PDA2702
PDA2703
PDA2703-1
PDA2703-2
PDA2704
PDA2704-1
PDA2704-1C
PDA2704-2
PDA2704-2C
PDA2704-3
PDA2704-3C
PDA2705
PDA2706
Vertical Cutouts
PDA2701-V
PDA2702-V
PDA2703-V
PDA2704-V
PDA2705-V
PDA2706-V
PDA2722
No Cutouts
PDA2703-B
PDA2706-B

PDA1024-01 24 VDC Power Supply for DIN Rail

PDA1024-01 24 VDC Power Supply for DIN Rail

The PDA1024-01 is a DIN rail mounted 24 VDC, 1.5 A power supply.

Specifications

Output Voltage: 21.6 ~ 26.4 VDC; ±10% 1.5A rated current.
Dimensions: 3.07" x 3.66" x 2.20"
(78 mm x 93 mm x 56 mm) (W x H x D)


PDA-SSTAG Stainless Steel Tags

PDA-SSTAG Stainless Steel Tags

PDA-SSTAG is a laser etched stainless steel tag accessory for any of your Precision Digital meters. The tag features custom text for equipment identification, instruction, or whatever else is needed in your facility. Each tag comes with a stainless steel wire and lead seal for easy mounting wherever you need it.


PDX18DIN-FILLER 1/8 DIN Cutout Filler

PDX18DIN-FILLER 1/8 DIN Cutout Filler

The NEMA 4X 1/8 DIN cutout filler is used to cover up empty 1/8 DIN cutouts and maintain the NEMA 4X rating to the panel or enclosure. It consists of a generic bezel with a black faceplate, as well as mounting brackets, gasket, etc.

PDA2700 Series Enclosure with Light / Horn

PDA2700 Series Enclosure with Light / Horn

PDA2704-1 Enclosure Shown with a ProVu Meter and MOD-LH Light / Horn and Reset Button. Meter & MOD-LH Sold Separately. Assembly Required.

Light / Horn Accessories

Precision Digital offers a Light / Horn that can be mounted to any PDA2700 Series enclosures by the user. This Light / Horn can be wired to flash or stay steady on and the horn is rated at 85 dB. The light and horn can be controlled independently of each other via separate relays on the meter such that the horn can be programmed to silence via a button mounted to the enclosure and the light can be programmed to stay on until the alarm clears.

The light / horn and reset button are all rated NEMA 4X or IP65. The following table illustrates a typical way the Light / Horn accessory can be wired and programmed using the four relays on the ProVu meter:

Relay #Connected toTypical reset method
(user selectable)
1Flashing Light(1)Reset automatically after alarm clears
2HornSilence with Reset Button at any time
3User DeviceAs user desires
4User DeviceAs user desires

1. Light can be wired to flash or stay steady on

Notes:

  1. The Light / Horn accessory is powered from the 200 mA transmitter power supply; so when it is installed, there is less power available for the transmitter. See MOD-LH and MOD-LHX2 Series manuals for details.
  2. See MOD-LHX2 manual for typical wiring diagrams using the Trident X2 meter, which has a capacity of only two relays.
PDA1024-01 Mounted on PDP2504 Sub-Panel
MOD-LH & MOD-LHX2 Light / Horn Accessories

When these are ordered, the enclosure comes pre-drilled with holes for the Light / Horn and Reset Button to be installed by user. Meter and enclosure are sold separately. The Light / Horn hole is in the back left corner of the enclosure and the Reset button is centered on the side of the enclosure about an inch off the bottom. For mounting in different locations, order items separately and drill holes and mount as desired. Other light and button colors are available.

Light / Horn Dimensions Units: Inches (mm)
Light / Horn Dimensions

Note: These specifications apply to the entire product series and may contain information that is not relevant to this particular model number.

General

Material: PDA2701: 16-gauge steel;
PDA2702-2706: 14-gauge steel
Color: Gray
Meters: Houses up to 6 meters
Meter Mounting Method: Through cover
Cover Mounting Method: Hinge / latch
Ratings: NEMA 4, 12 and 13
Approvals: UL, CSA
Warranty: 1 year

1/8 DIN Meter Types

Type Meters
B PD542, PD543, and PD562
C PD603, PD644, PD743, PD765, PD6602, PD6603, PD6604, PD6606, PD6607, PD6608, PD6622, PD6624, and PD6626, and PD6628.
D PD138, PD154, and PD158
E PD6000, PD6001, PD6060, PD6080, PD6081, PD6088, PD6089, PD6100, PD6200, PD6210, PD6262, PD6300, PD6310, PD6310-WM, PD6363, PD6400, and PD7000

Features

Available 1 Required

Model# of Meters1/8 DIN Meter Type
BCDE
DIN
14116
Fits
PDA1024-01
Fits
Light/Horn
Horizontal Cutouts
PDA27011
   
  
NoYes
PDA27022
   
  
NoYes
PDA27033
   
  
NoYes
PDA2703-11
   
  
NoYes
PDA2703-22
   
  
NoYes
PDA27044
 
  
YesYes
PDA2704-11
 
  
YesYes
PDA2704-1C1
 
  
YesYes
PDA2704-22
 
  
YesYes
PDA2704-2C2
 
  
YesYes
PDA2704-33
 
  
YesYes
PDA2704-3C3
 
  
YesYes
PDA27055
 
  
YesYes
PDA27066
 
  
YesYes
Vertical Cutouts
PDA2701-V1
   
  
NoYes
PDA2702-V2
   
  
NoYes
PDA27222
  
NoYes
PDA2703-V3
   
  
YesYes
PDA2704-V4
   
  
YesYes
PDA2705-V5
   
  
YesYes
PDA2706-V6
   
  
YesYes
No Cutouts
PDA2703-B N/ANoYes
PDA2706-B N/AYesYes

Dimensions

Units: Inches (mm)

Extra Small Enclosures

Extra Small Enclosures

Weight: 3.8 lbs (1.7 kg)

Dimensions for: PDA2701, PDA2701-V.


Small Enclosures

Small Enclosures

Weight: 5.1 lbs (2.3 kg)

Dimensions for: PDA2702, PDA2702-V, PDA2722.


Medium Enclosures

Medium Enclosures

Weight: 7.9 lbs (3.6 kg)

Dimensions for: PDA2703, PDA2703-1, PDA2703-2, PDA2703-B.


Large Enclosures

Large Enclosures

Weight: 13.9 lbs (6.3 kg)

Dimensions for: PDA2703-V, PDA2704, PDA2704-1, PDA2704-1C, PDA2704-2, PDA2704-2C, PDA2704-3, PDA2704-3C, PDA2704-V, PDA2705, PDA2705-V, PDA2706, PDA2706-B, PDA2706-V.


Download free 3D CAD files

Note: This tab applies to the entire product series and may contain information that is not relevant to this particular model number.

Add to Cart

SKU: PDA2703-2
Stock: 0
Lead Time: 33 business days
Price:
Price$437.00

GET A QUOTE