Model: PDA2605

PDA2600 Series Stainless Steel NEMA 4X Enclosures

UL Listing Canadian Standards Association
SKU: PDA2605
Product Type: NEMA 4X Enclosure
Materials: Stainless Steel
Cutouts: Five (5)
Meter Mounting: Through front panel
Orientation: Horizontal
Approvals: UL/C-UL, CSA
Warranty: 1 year
Product Family: PDA2600
Product Category: Enclosures
Product Application: Enclosures
Cover Method: Hinge / Screw
Cutout DIN Size: 1/8 DIN
Applicable Meter Types: A, B, C, E

Features

  • House up to 6 Meters
  • 16-Gauge Type 304 Stainless Steel
  • 14-Gauge Type 304 Stainless Steel
  • 1/8 DIN Cutout(s) Pre-Cut
  • Horizontal, Vertical, or No Cutouts
  • NEMA 4, 4X, 12, and 13
  • Cover Secured with Screwed Latches
  • Hinged Door
  • Meter Mounted in Cover
  • Sub-Panels Available
  • Mounting Holes Integral to Enclosure
  • PDA1024-01 24 VDC Power Supply Available
  • UL Listed, CSA Certified
  • Light / Horn & Reset Button

Overview

The PDA2600 series of stainless steel NEMA 4X enclosures for 1/8 DIN Digital Panel Meters provide a convenient way to mount up to six Precision Digital meters to walls and other vertical structures. Many of these enclosures also have room for additional devices like a light / horn and a 24 V transmitter power supply. These enclosures come pre-cut with horizontal or vertical 1/8 DIN cutouts or they can be ordered with no cutouts. The meters are mounted in the door of the enclosure thus allowing for programming and operation of the meter. No additional mounting hardware other than screws is needed. The door is hinged and secured with latches. Enclosures, meters and accessories are ordered and packaged separately.

Wall Mounting

The PDA2600 enclosures include integral mounting flanges attached at the top and bottom of the enclosure that can be used to mount the enclosures to a wall.

Wall mounting

Mounting flange for wall mounting

Cover Securing Method

The cover is secured in place with screwed latches.

Cover Securing Method

Accessories

Sub-Panels

Sub-Panels

The PDP2603 & PDP2604 sub-panels provide a convenient way to mount additional items to the base of the enclosure. They can be drilled to accept screws for easy mounting of relays, contactors, securing wiring clips, or installing other internal devices. See chart below for compatibility.

Sub-Panel Specifications

Size:
PDP2603: 8.75" × 6.88"
(222 mm × 175 mm)
PDP2604: 10.75" × 10.88"
(273 mm × 276 mm)
Thickness: 14 gauge
Material: Stainless steel
Mounting hardware is included.

ModelPDP2603PDP2604
Horizontal Cutouts
PDA2601
PDA2602
PDA2603
PDA2603-1
PDA2603-2
PDA2604
PDA2604-1
PDA2604-1C
PDA2604-2
PDA2604-2C
PDA2604-3
PDA2604-3C
PDA2605
PDA2606
Vertical Cutouts
PDA2601-V
PDA2602-V
PDA2603-V
PDA2604-V
PDA2605-V
PDA2606-V
PDA2622
No Cutouts
PDA2603-B
PDA2606-B

PDA1024-01 24 VDC Power Supply for DIN Rail

PDA1024-01 24 VDC Power Supply for DIN Rail

The PDA1024-01 is a DIN rail mounted 24 VDC, 1.5 A power supply.

Specifications

Output Voltage: 21.6 ~ 26.4 VDC; ±10% 1.5A rated current.
Dimensions: 3.07" x 3.66" x 2.20"
(78 mm x 93 mm x 56 mm) (W x H x D)

PDA-SSTAG Stainless Steel Tags

PDA-SSTAG Stainless Steel Tags

PDA-SSTAG is a laser etched stainless steel tag accessory for any of your Precision Digital meters. The tag features custom text for equipment identification, instruction, or whatever else is needed in your facility. Each tag comes with a stainless steel wire and lead seal for easy mounting wherever you need it.

PDX18DIN-FILLER 1/8 DIN Cutout Filler

PDX18DIN-FILLER 1/8 DIN Cutout Filler

The NEMA 4X 1/8 DIN cutout filler is used to cover up empty 1/8 DIN cutouts and maintain the NEMA 4X rating to the panel or enclosure. It consists of a generic bezel with a black faceplate, as well as mounting brackets, gasket, etc.

PDA2600 Series Enclosure with Light / Horn

PDA2600 Series Enclosure with Light / Horn

PDA2604-1 Enclosure Shown with a ProVu Meter and MOD-LH Light / Horn and Reset Button. Meter & MOD-LH Sold Separately. Assembly Required.

Light / Horn Accessories

Precision Digital offers a Light / Horn that can be mounted to any PDA2600 Series enclosures by the user. This Light / Horn can be wired to flash or stay steady on and the horn is rated at 85 dB. The light and horn can be controlled independently of each other via separate relays on the meter such that the horn can be programmed to silence via a button mounted to the enclosure and the light can be programmed to stay on until the alarm clears.

The light / horn and reset button are all rated NEMA 4X or IP65. The following table illustrates a typical way the Light / Horn accessory can be wired and programmed using the four relays on the ProVu meter:

Relay #Connected toTypical reset method
(user selectable)
1Flashing Light(1)Reset automatically after alarm clears
2HornSilence with Reset Button at any time
3User DeviceAs user desires
4User DeviceAs user desires

1. Light can be wired to flash or stay steady on

Notes:

  1. The Light / Horn accessory is powered from the 200 mA transmitter power supply; so when it is installed, there is less power available for the transmitter. See MOD-LH and MOD-LHX2 Series manuals for details.
  2. See MOD-LHX2 manual for typical wiring diagrams using the Trident X2 meter, which has a capacity of only two relays.
PDA1024-01 Mounted on PDP2604 Sub-Panel
MOD-LH & MOD-LHX2 Light / Horn Accessories

When these are ordered, the enclosure comes pre-drilled with holes for the Light / Horn and Reset Button to be installed by user. Meter and enclosure are sold separately. The Light / Horn hole is in the back left corner of the enclosure and the Reset button is centered on the side of the enclosure about an inch off the bottom. For mounting in different locations, order items separately and drill holes and mount as desired. Other light and button colors are available.

Light / Horn Dimensions Units: Inches (mm)
Light / Horn Dimensions

Note: These specifications apply to the entire product series and may contain information that is not relevant to this particular model number.

General

Material: PDA2601: 16-gauge, Type 304 SS; PDA2602-2606: 14-gauge, Type 304 SS
Color: Stainless steel: unpainted, smooth brushed finish
Meters: Houses up to 6 meters
Meter Mounting Method: Through cover
Cover Mounting Method: Hinge / latch
Ratings: NEMA 4, 4X, 12, and 13
Approvals: UL, CSA
Warranty: 1 year

1/8 DIN Meter Types

Type Meters
B PD542, PD543, and PD562
C PD603, PD644, PD743, PD765, PD6602, PD6603, PD6604, PD6606, PD6607, PD6608, PD6622, PD6624, and PD6626, and PD6628.
D PD138, PD154, and PD158
E PD6000, PD6001, PD6060, PD6080, PD6081, PD6088, PD6089, PD6100, PD6200, PD6210, PD6262, PD6300, PD6310, PD6310-WM, PD6363, PD6400, and PD7000

Features

Available 1 Required

Model# of Meters1/8 DIN Meter Type
BCDE
DIN
14116
Fits
PDA1024-01
Fits
Light/Horn
Horizontal Cutouts
PDA26011
   
  
NoYes
PDA26022
   
  
NoYes
PDA26033
   
  
NoYes
PDA2603-11
   
  
NoYes
PDA2603-22
   
  
NoYes
PDA26044
 
  
YesYes
PDA2604-11
 
  
YesYes
PDA2604-1C1
 
  
YesYes
PDA2604-22
 
  
YesYes
PDA2604-2C2
 
  
YesYes
PDA2604-33
 
  
YesYes
PDA2604-3C3
 
  
YesYes
PDA26055
 
  
YesYes
PDA26066
 
  
YesYes
Vertical Cutouts
PDA2601-V1
   
  
NoYes
PDA2602-V2
   
  
NoYes
PDA26222
  
NoYes
PDA2603-V3
   
  
YesYes
PDA2604-V4
   
  
YesYes
PDA2605-V5
   
  
YesYes
PDA2606-V6
   
  
YesYes
No Cutouts
PDA2603-B N/ANoYes
PDA2606-B N/AYesYes

Dimensions

Units: Inches (mm)

Extra Small Enclosures

Extra Small Enclosures

Weight: 3.8 lbs (1.7 kg)

Dimensions for: PDA2601, PDA2601-V.


Small Enclosures

Small Enclosures

Weight: 5.1 lbs (2.3 kg)

Dimensions for: PDA2602, PDA2602-V, PDA2622.


Medium Enclosures

Medium Enclosures

Weight: 7.9 lbs (3.6 kg)

Dimensions for: PDA2603, PDA2603-1, PDA2603-2, PDA2603-B.


Large Enclosures

Large Enclosures

Weight: 13.9 lbs (6.3 kg)

Dimensions for: PDA2603-V, PDA2604, PDA2604-1, PDA2604-1C, PDA2604-2, PDA2604-2C, PDA2604-3, PDA2604-3C, PDA2604-V, PDA2605, PDA2605-V, PDA2606, PDA2606-B, PDA2606-V.


Download free 3D CAD files

Note: This tab applies to the entire product series and may contain information that is not relevant to this particular model number.

Add to Cart

SKU: PDA2605
Stock: 0
Lead Time: 33 business days
Price:
Price$1,775.00

GET A QUOTE