Product Type: NEMA 4X Enclosure
Cutouts: Six (6)
DIN Size: 1/8 DIN
Meter Mounting: Through front panel
Warranty: 1 year
Product Family: PDA2500
Product Category: Enclosures
Product Application: Enclosures
Cover Method: Hinge / Screw
Cutout DIN Size: 1/8 DIN
Applicable Meter Types: A, B, C, E
- House up to 10 Meters
- Horizontal, Vertical or No Cutouts
- 1/16 DIN, 1/8 DIN and 1/4 DIN Cutouts
- NEMA 1, 3, 3S, 4, 4X, and 12
- Hinged Door
- Cover Held in Place with Screws
- Meter Mounted in Cover
- Sub-Panels Available
- Mounting Holes Integral to Enclosure
- PDA1024-01 24 VDC Power Supply Available
- UL Listed, CSA Certified
- Light / Horn & Reset Button
The PDA2500 series of rugged plastic NEMA 4X enclosures for 1/8 DIN Digital Panel Meters provide a convenient way to mount up to ten Precision Digital meters to walls and other vertical structures. Many of these enclosures also have room for additional devices like a light / horn and a 24 V transmitter power supply. Sub-panels are available to mount additional devices to the base of the enclosure. These enclosures come pre-cut with horizontal or vertical 1/16 DIN, 1/8 DIN and 1/4 DIN cutouts or they can be ordered with no cutouts. The meters are mounted in the door of the enclosure thus allowing for programming and operation of the meter. Mounting hardware is provided. The door is hinged and secured with screws. Enclosures, meters and accessories are ordered and packaged separately.
The PDA2500 enclosures come with two mounting flanges that can be attached to the top and bottom of the enclosure using two screws. These allow for easy and convenient wall mounting.
Mounting flange holes for wall mounting
Cover Securing Method
The cover is hinged and secured with screws.
The PDP2503, PDP2504, PDP2508 and PDP2510 sub-panels provide a convenient way to mount additional items to the base of the enclosure. They can be drilled to accept screws for easy mounting of relays, contactors, securing wiring clips, or installing other internal devices. See chart below for compatibility.
PDP2503: 8.75" × 6.88"
(222 mm × 175 mm)
PDP2504: 10.75" × 10.88"
(273 mm × 276 mm)
PDP2508: 12.75" × 10.88"
(324 mm × 276 mm)
PDP2510: 14.75" × 12.88"
(375 mm × 327 mm)
Thickness: 14 gauge
Mounting hardware is included.
PDA1024-01 24 VDC Power Supply for DIN Rail
The PDA1024-01 is a DIN rail mounted 24 VDC, 1.5 A power supply.
Output Voltage: 21.6 ~ 26.4 VDC; ±10% 1.5A rated current.
Dimensions: 3.07" x 3.66" x 2.20"
(78 mm x 93 mm x 56 mm) (W x H x D)
PDA-SSTAG Stainless Steel Tags
PDA-SSTAG is a laser etched stainless steel tag accessory for any of your Precision Digital meters. The tag features custom text for equipment identification, instruction, or whatever else is needed in your facility. Each tag comes with a stainless steel wire and lead seal for easy mounting wherever you need it.
PDX18DIN-FILLER 1/8 DIN Cutout Filler
The NEMA 4X 1/8 DIN cutout filler is used to cover up empty 1/8 DIN cutouts and maintain the NEMA 4X rating to the panel or enclosure. It consists of a generic bezel with a black faceplate, as well as mounting brackets, gasket, etc.
PDA2500 Series Enclosure with Light / Horn
PDA2504-1 Enclosure Shown with a ProVu Meter and MOD-LH Light / Horn and Reset Button. Meter & MOD-LH Sold Separately. Assembly Required.
Light / Horn Accessories
Precision Digital offers a Light / Horn that can be mounted to any PDA2500 series enclosures by the user. This Light / Horn can be wired to flash or stay steady on and the horn is rated at 85 dB. The light and horn can be controlled independently of each other via separate relays on the meter such that the horn can be programmed to silence via a button mounted to the enclosure and the light can be programmed to stay on until the alarm clears.
The light / horn and reset button are all rated NEMA 4X or IP65. The following table illustrates a typical way the Light / Horn option can be wired and programmed using the four relays on the ProVu meter:
|Relay #||Connected to||Typical reset method|
|1||Flashing Light(1)||Reset automatically after alarm clears|
|2||Horn||Silence with Reset Button at any time|
|3||User Device||As user desires|
|4||User Device||As user desires|
1. Light can be wired to flash or stay steady on
- The Light / Horn accessory is powered from the 200 mA transmitter power supply; so when it is installed, there is less power available for the transmitter. See MOD-LH and MOD-LHX2 Series manuals for details.
- See MOD-LHX2 manual for typical wiring diagrams using the Trident X2 meter, which has a capacity of only two relays.
MOD-LH & MOD-LHX2 Light / Horn Accessories
When these are ordered, the enclosure comes pre-drilled with holes for the Light / Horn and Reset Button to be installed by user. Meter and enclosure are sold separately. The Light / Horn hole is in the back left corner of the enclosure and the Reset button is centered on the side of the enclosure about an inch off the bottom. For mounting in different locations, order items separately and drill holes and mount as desired. Other light and button colors are available.
Light / Horn Dimensions Units: Inches (mm)
Note: These specifications apply to the entire product series and may contain information that is not relevant to this particular model number.
Meters: Houses up to 10 meters
Meter Mounting Method: Through cover
Cover Mounting Method: Hinge / screw
Ratings: NEMA 1, 3, 3S, 4, 4X, and 12
Approvals: UL, CSA
Operating Temperature: -40 to 120°C
Warranty: 1 year
1/8 DIN Meter Types
|B||PD542, PD543, and PD562|
|C||PD603, PD644, PD743, PD765, PD6602, PD6603, PD6604, PD6606, PD6607, PD6608, PD6622, PD6624, and PD6626, and PD6628.|
|D||PD138, PD154, and PD158|
|E||PD6000, PD6001, PD6060, PD6080, PD6081, PD6088, PD6089, PD6100, PD6200, PD6210, PD6262, PD6300, PD6310, PD6310-WM, PD6363, PD6400, and PD7000|
• Available ⊙ 1 Required
|Model||# of Meters||1/8 DIN Meter Type|
Units: Inches (mm)
Extra Small Enclosures
Weight: 1.6 lbs (0.7 kg)
Dimensions for: PDA2501, PDA2501-V, PDA2501-4, PDA2501-16.
Weight: 2.2 lbs (1.0 kg)
Dimensions for: PDA2502.
Weight: 3.0 lbs (1.4 kg)
Dimensions for: PDA2502-V, PDA 2522, PDA2503, PDA2503-B, PDA2503-1, PDA2503-2.
Weight: 5.0 lbs (2.3 kg)
Dimensions for: PDA2504, PDA2504-V, PDA2504-1, PDA2504-2, PDA2504-3, PDA2505, PDA2505-V, PDA2506, PDA2506-B, PDA2506-V, PDA2512.
Extra Large Enclosures
Weight: 5.5 lbs (2.5 kg)
Dimensions for: PDA2507, PDA2508, PDA2508-B.
Weight: 7.3 lbs (3.3 kg)
Dimensions for: PDA2509, PDA2510, PDA2510-B.
Note: This tab applies to the entire product series and may contain information that is not relevant to this particular model number.