PD6600 Series Loop-Powered Process Meters


These 1/8 DIN loop-powered meters are available in safe area configurations with UL electrical safety approval and hazardous area approval with UL, ATEX & IECEx Intrinsically safe and nonincendive (UL only) approvals. One of the most convenient features of these instruments is their dual line display which is typically used to display the process variable on the 5-digit alphanumeric top line and the units or a tag on the 8-digit alphanumeric bottom line. They can be easily programmed via the four front panel buttons or free PC based software. All models come equipped with two open collector outputs and are available with two solid state relays and 4-20 mA analog output options.
Why you should buy:
- Simple Installation – Break the Loop and Wire it in
- Easy Programming with Free PC-based SW
- Install Virtually Anywhere – Hot, Cold, Wet, Dark, Bright, Dirty & Hazardous Areas
- Minimal Voltage Burden on the Loop
- Informative Dual-Line Display
- Indicate Alarms with Relays, Open Collectors and Flashing Red Display
- Isolate Transmitter Loop from Control Room
PD6600 Series Loop-Powered Feet & Inches Level Meter

These 1/8 DIN loop-powered meters display level in feet & inches and are available in safe area configurations with UL electrical safety approval and hazardous area approval with UL, ATEX & IECEx Intrinsically safe and nonincendive (UL only) approvals. One of the most convenient features of these instruments is their dual line display which is typically used to display the level in feet and inches on top line and either volume, units or a tag on the 8-digit alphanumeric bottom line. The 20-segment bargraph provides another convenient way to indicate the level. They can be easily programmed via the four front panel buttons or free PC based software. All models come equipped with two open collector outputs and are available with two solid state relays and 4-20 mA analog output options.
Why you should buy:
- Display Level the Way you Want it - in Feet & Inches
- Use Second Line for Volume, Units or Tag
- Simple Installation – Break the Loop and Wire it in
- Easy Programming with Free PC-based SW
- Install Virtually Anywhere – Hot, Cold, Wet, Dark, Bright, Dirty & Hazardous Areas
- Minimal Voltage Burden on the Loop
- Indicate Alarms with Relays, Open Collectors and Flashing Red Display
- Isolate Transmitter Loop from Control Room
PD6620 Series Loop-Powered Rate/Totalizers


These 1/8 DIN loop-powered flow rate/totalizers are available in safe area configurations with UL electrical safety approval and hazardous area approval with UL, ATEX & IECEx Intrinsically safe and nonincendive (UL only) approvals. One of the most convenient features of these instruments is their dual line display which is typically used to display flow rate on the 5-digit alphanumeric top line and flow total on the 8-digit alphanumeric bottom line. They can be easily programmed via the four front panel buttons or free PC based software. All models come equipped with two open collector outputs and are available with two solid state relays and 4-20 mA analog output options.
Why you should buy:
- Display Flow Rate and Total at the Same Time
- Send Pulse Output to Another Counting Device
- Simple Installation – Break the Loop and Wire it in
- Easy Programming with Free PC-based SW
- Install Virtually Anywhere – Hot, Cold, Wet, Dark, Bright, Dirty & Hazardous Areas
- Minimal Voltage Burden on the Loop
- Indicate Alarms with Relays, Open Collectors and Flashing Red Display
- Isolate Transmitter Loop from Control Room
Free Meterview XL PC-Based Programming Software


The main screen displays an image of the connected meter and includes various information about this meter, such as model number, readings, and status.
Free, PC-based, MeterView XL software that connects to the meter via a micro USB cable is available for programming and setup of the meters. This software greatly simplifies the programming process and also allows the user to save configuration files for later use. The meter will also be powered by the USB connection so no additional power is needed during programming.
- Free
- Easiest Way to Program Your Loop Leader
- Convenient USB Connection
- Meter Powered by USB Connection During Programming
- Save & Print Configuration Files without Meter Connected
- Micro USB Cable Provided