- Wireless Repeater Unit Improves Signal Strength and Range for PDW Wireless Systems
- Use in PDW30 Point-to-Point and PDW90 Point-to-Multipoint Wireless Systems
- Increase Range an Additional 1 Mile Line-of-Sight, 500 Feet Indoor
- Increases Range of the Analog, Digital I/O and Modbus Signals
- Simple to Configure Using PDW Manager Programming Software and On-Board USB
- Use CapTouch Through-Glass Buttons to Change Network ID
- Device Communication Secured by Enabling 128-bit AES Encryption
- Password Protection
- PDWR Repeaters are ETL (Intertek) Certified for Use in Hazardous Areas as Explosion-Proof
- IP68, Type 4X & NEMA 4X Aluminum & Stainless Steel Enclosures With Plenty of Room for Field Wiring
- Operating Temperature Range: -40 to 65°C (-40 to 149°F)
- Conformal Coated PCBs for Dust & Humidity Protection
- Flange for Wall or Pipe Mounting; Loop for Stainless Steel Tag; Holes for Tamper-Proof Seal
- 9-30 VDC Power
- 3-Year Warranty
** NEW IMPROVED WEB STORE! | All users must register for a new account. | Register now > **
BUY ONLINE TO SAVE TIME AND INCREASE ORDER ACCURACY!
Explosion-Proof Wireless Signal Repeater for PDW30 & PDW90
Models in stock
from $875.00
The PDWR Wireless Signal Repeater is used to improve connectivity in PDW30 point-to-point and PDW90 point-to-multipoint wireless systems by extending signal range and strengthening communication. Simple to install with only power and a network ID, PDWR repeaters can help overcome long distances and permanent obstacles, typically adding up to 1 mile line-of-sight or 500 feet indoors. Available in aluminum or stainless steel Type 4X / NEMA 4X, IP68 enclosures, PDWR repeaters are also ETL certified explosion-proof for hazardous areas.
- Extends PDW30 and PDW90 wireless range
- Helps overcome distance and permanent obstacles
- Simple setup with power and network ID only
- Explosion-proof for hazardous area installationsĀ

