The PDA1232 converts the serial output of the ProVu meter to an unbalanced, full-duplex RS-232 signal. The RS-232 port has a female DB9 connector with pins 2 (RX output), 3 (TX input), and 5 (Signal Ground). Pins 7 (RTS) and 8 (CTS) are tied together, and pins 1 (CD), 4 (DTR), and 6 (DSR) are tied together. The adapter is powered by the ProVu meter M-Link connection. The PDA1232 has three diagnostic LEDs: a Power (P) LED to show when the adapter is powered properly, a Transmit Data (TX) LED to show when the adapter is sending data out from the PC side, and a Receive Data (RX) LED to show when the adapter is receiving data from the ProVu meter.
Accessories & Modifications
The PDA1485 converts the serial output of the ProVu meter to balanced, full or half-duplex RS-485 signals. The PDA1485 has a removable screw terminal connector for the RS-485 terminals which includes Transmit Data (DO) and (/DO), Receive Data (DI) and (/DI), and Signal Ground. The adapter is provided by the ProVu meter M-Link connection. The PDA1485 has three diagnostic LEDs: a Power (P) LED to show when the adapter is powered properly, a Transmit Data (TX) LED to show when the adapter is sending data out from the PC side, and a Receive Data (RX) LED to show when the adapter is receiving data from the ProVu meter.
The PDA8232 USB to RS-232 converter is a 3 ft. cable used to convert USB (male) to RS-232 (male).
The PDA8485 USB to RS-485 converter converts USB to balanced, full or half-duplex RS-422 or RS-485 signals
The PDA7485 RS-232 to RS-422/485 converter converts unbalanced, full-duplex RS-232 signals to balanced, full or half-duplex RS-422 or RS-485 signals. It is available in both isolated and non-isolated versions.
- The PDA9000 input / output cards for the ConsoliDator+ can be installed in the field by the user should they decide to alter the original configuration of the ConsoliDator+ they purchased.
- Precision Digital can help you get up and running quickly with our Custom Setup services. Let us set up your meter or controller and all you will have to do is install it into your system. Setup services may include scaling and settings such as alarm conditions preprogrammed to the values you choose.
The PD1102 is a 2 relay option upgrade card for the ProVu series of digital panel meters.
The PD1103 is a 4-20 mA analog output option upgrade card for the ProVu series of digital panel meters.
The PD1104 is a 4 relay option upgrade card for the ProVu series of digital panel meters.