The PDA2500 Series Enclosures have been discontinued. The only enclosures available are those listed below with stock quantities greater than zero. Please consider the PDA2300 Series Enclosures as a suitable replacement.

PDA2501
PDA2501-V
PDA2502
PDA2502-V
PDA2503
PDA2503-V
PDA2504
PDA2504-V
PDA2505
PDA2505-V
PDA2506
PDA2506-V
PDA2507
PDA2508
PDA2509
PDA2510
PDA2522
PDA2501-4
PDA2501-16
PDA2504-1
PDA2504-2
PDA2504-3
PDA2502 with MOD-LRHB1
PDA2512 with MOD-LRHB1
No cutouts

Features

  • House up to 10 Meters
  • Plastic
  • Horizontal, Vertical or No Cutouts
  • 1/16 DIN, 1/8 DIN and 1/4 DIN Cutouts
  • NEMA 1, 3, 3S, 4, 4X, and 12
  • Hinged Door
  • Cover Held in Place with Screws
  • Meter Mounted in Cover
  • Sub-Panels Available
  • Mounting Holes Integral to Enclosure
  • PDA1024-01 24 VDC Power Supply Available
  • UL Listed, CSA Certified
  • Light / Horn & Reset Button

Overview

The PDA2500 series of rugged plastic NEMA 4X enclosures for 1/8 DIN Digital Panel Meters provide a convenient way to mount up to ten Precision Digital meters to walls and other vertical structures. Many of these enclosures also have room for additional devices like a light / horn and a 24 V transmitter power supply. Sub-panels are available to mount additional devices to the base of the enclosure. These enclosures come pre-cut with horizontal or vertical 1/16 DIN, 1/8 DIN and 1/4 DIN cutouts or they can be ordered with no cutouts. The meters are mounted in the door of the enclosure thus allowing for programming and operation of the meter. Mounting hardware is provided. The door is hinged and secured with screws. Enclosures, meters and accessories are ordered and packaged separately.

Wall Mounting

The PDA2500 enclosures come with two mounting flanges that can be attached to the top and bottom of the enclosure using two screws. These allow for easy and convenient wall mounting.

PDA2500 Wall Mounting

Mounting flange holes for wall mounting

PDA2500 Mounting flange

Mounting flange

Cover Securing Method

The cover is hinged and secured with screws.

PDA2500 Cover hinges

Accessories

Sub-Panels

Sub-Panels

The PDP2503, PDP2504, PDP2508 and PDP2510 sub-panels provide a convenient way to mount additional items to the base of the enclosure. They can be drilled to accept screws for easy mounting of relays, contactors, securing wiring clips, or installing other internal devices. See chart below for compatibility.

Sub-Panel Specifications

Size:
PDP2503: 8.75" × 6.88"
(222 mm × 175 mm)
PDP2504: 10.75" × 10.88"
(273 mm × 276 mm)
PDP2508: 12.75" × 10.88"
(324 mm × 276 mm)
PDP2510: 14.75" × 12.88"
(375 mm × 327 mm)
Thickness: 14 gauge
Material: Steel
Mounting hardware is included.

ModelPDP2503PDP2504PDP2508PDP2510
Horizontal Cutouts
PDA2501
PDA2501-4
PDA2501-16
PDA2502
PDA2503
PDA2503-1
PDA2503-2
PDA2504
PDA2504-1
PDA2504-2
PDA2504-3
PDA2505
PDA2506
PDA2507
PDA2508
PDA2509
PDA2510
PDA2512
Vertical Cutouts
PDA2501-V
PDA2502-V
PDA2503-V
PDA2504-V
PDA2505-V
PDA2506-V
PDA2522
No Cutouts
PDA2503-B
PDA2506-B
PDA2508-B
PDA2510-B

PDA1024-01 24 VDC Power Supply for DIN Rail

PDA1024-01 24 VDC Power Supply for DIN Rail

The PDA1024-01 is a DIN rail mounted 24 VDC, 1.5 A power supply.

Specifications

Output Voltage: 21.6 ~ 26.4 VDC; ±10% 1.5A rated current.
Dimensions: 3.07" x 3.66" x 2.20"
(78 mm x 93 mm x 56 mm) (W x H x D)

PDA-SSTAG Stainless Steel Tags

PDA-SSTAG Stainless Steel Tags

PDA-SSTAG is a laser etched stainless steel tag accessory for any of your Precision Digital meters. The tag features custom text for equipment identification, instruction, or whatever else is needed in your facility. Each tag comes with a stainless steel wire and lead seal for easy mounting wherever you need it.

PDX18DIN-FILLER 1/8 DIN Cutout Filler

PDX18DIN-FILLER 1/8 DIN Cutout Filler

The NEMA 4X 1/8 DIN cutout filler is used to cover up empty 1/8 DIN cutouts and maintain the NEMA 4X rating to the panel or enclosure. It consists of a generic bezel with a black faceplate, as well as mounting brackets, gasket, etc.

PDA2500 Series Enclosure with Light / Horn


PDA2500 Series Enclosure with Light / Horn

PDA2504-1 Enclosure Shown with a ProVu Meter and MOD-LH Light / Horn and Reset Button. Meter & MOD-LH Sold Separately. Assembly Required.

Light / Horn Accessories

Precision Digital offers a Light / Horn that can be mounted to any PDA2500 series enclosures by the user. This Light / Horn can be wired to flash or stay steady on and the horn is rated at 85 dB. The light and horn can be controlled independently of each other via separate relays on the meter such that the horn can be programmed to silence via a button mounted to the enclosure and the light can be programmed to stay on until the alarm clears.

The light / horn and reset button are all rated NEMA 4X or IP65. The following table illustrates a typical way the Light / Horn option can be wired and programmed using the four relays on the ProVu meter:

Relay #Connected toTypical reset method
(user selectable)
1Flashing Light(1)Reset automatically after alarm clears
2HornSilence with Reset Button at any time
3User DeviceAs user desires
4User DeviceAs user desires

1. Light can be wired to flash or stay steady on

Notes:

  1. The Light / Horn accessory is powered from the 200 mA transmitter power supply; so when it is installed, there is less power available for the transmitter. See MOD-LH and MOD-LHX2 Series manuals for details.
  2. See MOD-LHX2 manual for typical wiring diagrams using the Trident X2 meter, which has a capacity of only two relays.
PDA1024-01 Mounted on PDP2504 Sub-Panel
MOD-LH & MOD-LHX2 Light / Horn Accessories

When these are ordered, the enclosure comes pre-drilled with holes for the Light / Horn and Reset Button to be installed by user. Meter and enclosure are sold separately. The Light / Horn hole is in the back left corner of the enclosure and the Reset button is centered on the side of the enclosure about an inch off the bottom. For mounting in different locations, order items separately and drill holes and mount as desired. Other light and button colors are available.

Light / Horn Dimensions Units: Inches (mm)
Light / Horn Dimensions

General

Material: Thermoplastic
Color: Gray
Meters: Houses up to 10 meters
Meter Mounting Method: Through cover
Cover Mounting Method: Hinge / screw
Ratings: NEMA 1, 3, 3S, 4, 4X, and 12
Approvals: UL, CSA
Operating Temperature: -40 to 120°C
Warranty: 1 year

1/8 DIN Meter Types

Type Meters
B PD542, PD543, and PD562
C PD603, PD644, PD743, PD765, PD6602, PD6603, PD6604, PD6606, PD6607, PD6608, PD6622, PD6624, and PD6626, and PD6628.
D PD138, PD154, and PD158
E PD6000, PD6001, PD6060, PD6080, PD6081, PD6088, PD6089, PD6100, PD6200, PD6210, PD6262, PD6300, PD6310, PD6310-WM, PD6363, PD6400, and PD7000

Features

Available 1 Required

Model# of Meters1/8 DIN Meter Type
BCDE
DIN
14116
Fits
PDA1024-01
Fits
Light/Horn
Horizontal Cutouts
PDA25011
  
  
YesYes
PDA2501-41
   
 
YesYes
PDA2501-161
   
 
YesYes
PDA25022
  
  
YesYes
PDA25033
  
  
YesYes
PDA2503-11
  
  
YesYes
PDA2503-22
  
  
YesYes
PDA25044
 
  
YesYes
PDA2504-11
 
  
YesYes
PDA2504-22
 
  
YesYes
PDA2504-33
 
  
YesYes
PDA25055
 
  
YesYes
PDA25066
 
  
YesYes
PDA25122
 
  
YesYes
PDA25077
 
  
YesYes
PDA25088
 
  
YesYes
PDA25099
 
  
YesYes
PDA251010
 
  
YesYes
Vertical Cutouts
PDA2501-V1
   
  
YesYes
PDA2502-V2
   
  
YesYes
PDA25222
  
YesYes
PDA2503-V3
   
  
YesYes
PDA2504-V4
   
  
YesYes
PDA2505-V5
   
  
YesYes
PDA2506-V6
   
  
YesYes
No Cutouts
PDA2503-B N/AYesYes
PDA2506-B N/AYesYes
PDA2508-B N/AYesYes
PDA2510-B N/AYesYes

Dimensions

Units: Inches (mm)

Extra Small Enclosures

Extra Small Enclosures

Weight: 1.6 lbs (0.7 kg)

Dimensions for: PDA2501, PDA2501-V, PDA2501-4, PDA2501-16.


Small Enclosure

Small Enclosure

Weight: 2.2 lbs (1.0 kg)

Dimensions for: PDA2502.


Medium Enclosures

Medium Enclosures

Weight: 3.0 lbs (1.4 kg)

Dimensions for: PDA2502-V, PDA 2522, PDA2503, PDA2503-B, PDA2503-1, PDA2503-2.


Large Enclosures

Large Enclosures

Weight: 5.0 lbs (2.3 kg)

Dimensions for: PDA2504, PDA2504-V, PDA2504-1, PDA2504-2, PDA2504-3, PDA2505, PDA2505-V, PDA2506, PDA2506-B, PDA2506-V, PDA2512.


Extra Large Enclosures

Extra Large Enclosures

Weight: 5.5 lbs (2.5 kg)

Dimensions for: PDA2507, PDA2508, PDA2508-B.


Jumbo Enclosures

Jumbo Enclosures

Weight: 7.3 lbs (3.3 kg)

Dimensions for: PDA2509, PDA2510, PDA2510-B.


Download free 3D CAD files
loader.gif

Choose Your Options

Configurations other than those specified above are available at a $250 adder. Consult factory for desired model number and price.

Select the right enclosure