|
 |
|
|
||||||||
|
|
|||||||||||
Digital Panel Meters
Digital Panel Indicators
Field Mounted Products
Explosion Proof Products
Large Display Meters
Loop-Powered Meters
Temperature Controllers
Annunciators
Scanners
Multi-Channel Controllers
Fluidwell Products
Pressure Gauges
Enclosures
Process Meters
Process Indicators
Temperature Meters
Level Meters
Pressure Gauges
Flow Rate Meter
Flow Rate / Totalizers
Flow Computers
Flow Controller
Batch Controllers
Strain Gauge Meters
Auto-Tune PID Controllers
Limit Controllers
Alarm Annunciators
Scanners
Modbus Products
Calibrators
Level
Pump Control
Temperature
Pressure
Flow
Open Channel Flow
Batch Control
Hazardous Area
Speed
Weight
Discrete Alarm Monitoring
Remote Modbus Display
Calibration
ProtEX Series
ProVu Series
Trident Series
ConsoliDator Series
Fluidwell Series
Loop Leader Series
Minimux II
Nova Series
Precision Calibrator
Sabre Series
Snooper Series
Survivior Series
Vigilante II Series
200 Series
ProVu Expansion Cards
ProVu Expansion Modules
Serial Communication Adapters
Serial Communication Converters
ProtEX Accessories
Enclosures
Consolidator Accessories
Enclosure Sub-Panels
Mounting Kits
Pressure Gauges
Miscellaneous Accessories
PD743 Sabre Digital Temperature Meter |
EASY SETUP AND PROGRAMMINGThe Sabre T temperature meter is easily programmed using the four front panel buttons. There is only one switch on the entire meter, there are no jumpers, and no need to ever open the case.Front Panel Buttons User Friendly Menu StructureTo simplify programming, one menu handles all the setup functions.
Menu Structure The menu consists of the following functions: Setup, Program, and Password. Press the Menu button to enter the Programming Mode then press the Up arrow button to scroll through the menu. The Setup menu is used to select the input signal and °F or °C. The Program menu is used to scale or calibrate the meter. The Password menu is used to program a password. The display moves to the next menu after the Enter/ACK button is pressed.  Setting Numeric Values The numeric values are set using the Right and Up arrow buttons. Press the Right arrow button to select next digit and the Up arrow button to increment the digit value. The digit being changed is displayed brighter than the rest. Press the Enter/ACK button, at any time, to accept a setting or the Menu button to exit without saving the changes.  SIMPLE OPERATIONLook to the Sabre T temperature meter for the key features you want and don’t worry about getting bogged down in a confusing array of things you don't need. The Sabre T provides all the utility needed to handle your application with accuracy and simplicity.Maximum/Minimum Readings To display the maximum and minimum readings since the last reset/power-up, use the Up arrow/Max button. QUICK INSTALLATIONThe Sabre T is housed in a 1/8 DIN shallow depth case that is designed for easy installation and servicing. The extra large front bezel is rated Type 4X, IP65. The mounting brackets are locked in place to make it easy to mount the meter in the panel. Removable screw terminal connectors make for easy and convenient wiring.Mounting Dimensions Notes: 1. Panel cutout required: 1.772 x 3.622 (45 x 92) 2. Panel thickness: 0.040 – 0.250 (1.0 – 6.4) 3. Mounting brackets lock in place for easy mounting TEMPERATURE INPUTSThe Sabre T temperature meter is factory calibrated to accept type J, K, T, or E thermocouples and 100 Ω platinum RTDs.Temperature inputs can be programmed to display in degrees Fahrenheit or Celsius and the type K thermocouple can display up to 2300°F. Thermocouple & RTD inputsSetting up the Sabre T to accept thermocouple or RTD inputs is simply a matter of setting a switch at the rear of the case and selecting the input type from the menu.The meter accepts J, K, T, or E type thermocouples as well as two, three, or four-wire 100 Ω platinum RTDs.  Thermocouple and RTD Inputs Connectors Location Rear View of Meter OPTIONAL FIELD ENCLOSURESThe Sabre T temperature meter is available with a wide variety of NEMA 4, NEMA 4X, and explosion-proof enclosures.NEMA 4 & NEMA 4X EnclosuresThe NEMA 4 and NEMA 4X enclosures are available in stainless steel, steel, and plastic. They come with pre-punched 1/8 DIN cutouts for up to ten meters. The meters are mounted in the enclosure door so they can be programmed without opening the enclosure. Options include 2" pipe mounting kits.Low-Cost Plastic NEMA 4X Enclosure The PDA2801 is a low-cost, compact, plastic NEMA 4X enclosure that will house one meter. Plastic, Steel & Stainless Steel These NEMA 4 & 4X enclosures house from one to ten meters and feature a hinged door. Enclosures and meters are ordered and packaged separately. Explosion-proof EnclosuresThese explosion-proof enclosures house one or two meters and are UL & C-UL Classified as NEMA 4, 7 & 9 for location in Class I, Groups C & D; Class II, Groups E, F, G; and Class III. Enclosures and meters are ordered and packaged separately.SPECIFICATIONSExcept where noted all specifications apply to operation at +25°C.GeneralDisplay: 0.56" (14.2 mm) red LED, 4 digits (-1999 to 9999)Front Panel: NEMA 4X, IP65; panel gasket provided Programming Methods: Four front panel buttons Display Update Rate: RTD: 5/sec; TC: 2.5/sec Overrange: Display flashes 9999 Underrange: Display flashes -1999 Recalibration: All inputs are calibrated at the factory; recalibration is recommended at least every 12 months Max/Min Display: Stored until reset by user or meter is turned off Password: Restricts modification of programmed settings Non-Volatile Memory: Settings stored for a minimum of 10 years Power Options: 85-265 VAC, 50/60 Hz; 90-265 VDC, 8 W max or 12-36 VDC; 12-24 VAC, 6 W max Required Fuse: UL Recognized, 5 A max, slow-blow; up to 6 meters may share one fuse Normal Mode Rejection: 64 dB at 50/60 Hz Isolation: 4 kV input/output-to-power line Operating Temperature: 0 to 65°C Storage Temperature: -40 to 85°C Relative Humidity: 0 to 90% Connections: Power & Signal: removable screw terminal blocks accept 12 to 22 AWG. Note: RJ11 header for factory use only Enclosure: 1/8 DIN, high impact plastic, 94 V-0, color; gray Weight: 8.5 oz (241 g) UL File Number: E160849; 508 Industrial Control Equipment Warranty: 1 year parts & labor Extended Warranty: 1 or 2 years, refer to Price List for details Temperature InputsInputs: Factory calibrated, field selectable: type J, K, T, or E thermocouples and 100 Ω platinum RTD (0.00385 or 0.00392 curve)Resolution: 1°; type T: 1° or 0.1° Cold Junction Reference: Automatic Temperature Drift: ±2°C maximum Input Impedance: Greater than 100 k Ω
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DOCUMENTATION |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Blue dot denotes item as a 
 |
 |
|
