|
 |
|
|
||||||||
|
|
|||||||||||
Digital Panel Meters
Digital Panel Indicators
Field Mounted Products
Explosion Proof Products
Large Display Meters
Loop-Powered Meters
Temperature Controllers
Annunciators
Scanners
Multi-Channel Controllers
Fluidwell Products
Pressure Gauges
Enclosures
Process Meters
Process Indicators
Temperature Meters
Level Meters
Pressure Gauges
Flow Rate Meter
Flow Rate / Totalizers
Flow Computers
Flow Controller
Batch Controllers
Strain Gauge Meters
Auto-Tune PID Controllers
Limit Controllers
Alarm Annunciators
Scanners
Modbus Products
Calibrators
Level
Pump Control
Temperature
Pressure
Flow
Open Channel Flow
Batch Control
Hazardous Area
Speed
Weight
Discrete Alarm Monitoring
Remote Modbus Display
Calibration
ProtEX Series
ProVu Series
Trident Series
ConsoliDator Series
Fluidwell Series
Loop Leader Series
Minimux II
Nova Series
Precision Calibrator
Sabre Series
Snooper Series
Survivior Series
Vigilante II Series
200 Series
ProVu Expansion Cards
ProVu Expansion Modules
Serial Communication Adapters
Serial Communication Converters
ProtEX Accessories
Enclosures
Consolidator Accessories
Enclosure Sub-Panels
Mounting Kits
Pressure Gauges
Miscellaneous Accessories
PD662 Survivor NEMA 4X Loop-Powered Meter |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
INTRODUCTIONThe PD662 NEMA 4X, CSA Certified loop-powered meter is perfect for applications where a simple, inexpensive display is required and AC power is not available. The PD662 derives all its power from the 4-20 mA loop. The PD662 is scaled using four push buttons and can be done without applying an actual calibration signal. The PD662's display will read up to 2999; we call this 3+ digits! The loop-powered backlighting option lets you see the display under any lighting condition and is powered completely from the 4-20 mA loop. This means there is no need for additional wiring and never any batteries to change. The PD662 is housed in a rugged NEMA4X enclosure and is provided with one ½" NPT pipe conduit hole.The PD662 is also available with an optional DC-powered heater that allows the PD662 to operate in temperatures as low as -55°C.QUICKSTARTThe PD662 is designed to be easily wired into your current loop and quickly programmed.WiringThe two wire power/signal connection is made on the back of the PD662 on the three position removable terminal block. Follow instructions printed on the unit for two wire loop-powered connections with or without backlight. PD662 Input Connections with Backlight  PD662 Input Connections without Backlight  PD662 Heater Connections PROGRAMMINGThe PD662 Survivor comes calibrated and scaled at the factory to display a 4.00 to 20.00 mA signal on startup. To change the scaling, follow along using the 4 button interface.  PD662 Menu Progression DIMENSIONS SPECIFICATIONSExcept where noted all specifications apply to operation at +25°C.GeneralDisplay: 0.6" (15.24 mm) LCD, 3½+ digits; -1999 to 2999Display Update Rate: 2 Updates/Second Over-Range: Display Flashes 2999 Under-Range: Display Flashes -1999 Programming Method: 4 Front Panel Pushbuttons Noise Filter: Programmable HI, LOW, or OFF Recalibration: Recalibration is recommended at least every 12 months. Max/Min Display: Max/Min readings reached by the process are stored until reset by the user or until power to the meter is turned off. Non-Volatile Memory: All programmed settings are stored in non-volatile memory for a minimum of ten years if power is lost. Normal Mode Rejection: 64 dB at 50/60 Hz Environmental: Operating Temperature for CSA Certification: -40 to 75°C. Functional Temperature Range: -40 to 85°C. Storage Temp.: -40 to 85°C. Relative Humidity: 0 to 90% non-condensing. Connections: Removable screw terminals accept 12 to 22 AWG Tightening Torque: Screw terminal connectors: 4.5 lb-in (0.5 Nm) Enclosure: Impact-resistant polyester plastic, body color gray, clear cover with blue faceplate; NEMA 4X, IP66; ½" conduit hole provided at base Weight: 9.3 oz (264 g) Overall Dimensions: 3.15" x 4.33" x 2.76" (80 mm x 110 mm x 70 mm) (W x H x D) Warranty: 3 years parts & labor InputInput: 4-20 mAAccuracy: ±1 count Temperature Drift: 50 PPM/°C from -40 to 85°C ambient Decimal Point: User selectable decimal point Minimum Span: Input 1 & Input 2: 0.40 mA Maximum Voltage Drop: 1.7 VDC @ 20 mA; 4.9 VDC @ 20 mA with backlight option. Equivalent Resistance: 85 Ω @ 20 mA without backlight; 185 Ω @ 20 mA with backlight Loop-Powered Backlight Option: Factory installed only with field wiring option. Powered directly from the 4-20 mA loop, no batteries required. The display brightness will increase as the input signal current increases. Heater OptionPower: 24 VDC, 11 W Maximum.Required Switch & Fuse: A CSA Approved fuse rated min 30 VDC, 1 A, T and a readily accessible switch or a circuit breaker shall be provided to facilitate the disconnection of power to the heater. Environmental: Operating Temperature for CSA Certification: -55 to 75°C. Functional Operation: -55 to 85°C. Storage Temperature: -55 to 85°C. Relative Humidity: 0 to 90% non-condensing. Temperature Cutoff: Internal 104°C thermal cutoff for over temperature protection. CSA CertificationCSA Certified: U.S. & Canada. 2252 05 — Process Control Equipment. 2252 85 — Process Control Equipment, U.S. Standards.CSA File Number: 157123 CSA Applicable Requirements: CAN/CSA C22.2 No. 61010-1-04 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use – Part 1: General Requirements UL 61010-1:2004, 2nd Edition Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use – Part 1: General Requirements. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DOCUMENTATION |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Blue dot denotes item as a 
 |
 |
|
