SABRE DIGITAL PROCESS METERS
|
- 0-20, 4-20 mA, 0-5, 1-5, 0-10, ±10 V Inputs
- Input Current Overload Protection
- NEMA 4X, IP65 Front
- Shallow Depth 1/8 DIN Case 3.6" Behind Panel
- 4 Digit Display, 0.56” (14 mm) High, Red LEDs
- Easy Front Panel Programming
- Scale without a Signal Source
- Calibrate with a Signal Source
- Maximum/Minimum Display
- Universal Power Supply 85-265 VAC
- 12-36 VDC/12-24 VAC Power Option
- 24 VDC @ 200 mA Transmitter Supply Option
|
EASY SETUP AND PROGRAMMING
The Sabre P process meter is easily programmed using the four front panel buttons. There are no jumpers or switches to configure and there is no need to ever open the case.
Front Panel Buttons
User Friendly Menu Structure
To simplify programming, one menu handles all the setup functions.
• Press the Menu button to enter or exit the Programming Mode at any time.
• Press the Right arrow button to move to the next digit during digit programming.
• Press the Up arrow button to scroll through the menus, decimal point, or to increment the value of a digit.
• Press the Enter/Ack button to access a menu or to accept a setting.
|
|
|
Setup Menu
•Select input
•Decimal point
|
Program Menu
•Scale meter without signal
•Calibrate meter with signal
|
Password Menu
•Prevent changes to meter settings
|
Menu Structure
The menu consists of the following functions: Setup, Program, and Password. Press the Menu button to enter the Programming Mode then press the Up arrow button to scroll through the menu.
The Setup menu is used to select the input signal and decimal point. The Program menu is used to scale or calibrate the meter. The Password menu is used to program a password.
The display moves to the next menu after the Enter/ACK button is pressed.
Setting Numeric Values
The numeric values are set using the Right and Up arrow buttons. Press the Right arrow button to select next digit and the Up arrow button to increment the digit value.
The digit being changed is displayed brighter than the rest.
Press the Enter/ACK button, at any time, to accept a setting or the Menu button to exit without saving the changes.
SIMPLE OPERATION
Look to the Sabre P process meter for the key features you want and don't worry about getting bogged down in a confusing array of things you don't need. The Sabre P provides all the utility needed to handle your application with accuracy and simplicity.
Maximum/Minimum Readings
To display the maximum and minimum readings since the last reset/power-up, use the Up arrow/Max button.
QUICK INSTALLATION
The Sabre P is housed in a 1/8 DIN shallow depth case that is designed for easy installation and servicing. The extra large front bezel is rated Type 4X, IP65. The mounting brackets are locked in place to make it easy to mount the meter in the panel. The removable screw terminal connectors make for easy and convenient wiring.
Mounting Dimensions
Notes:
1. Panel cutout required: 1.772 x 3.622 (45 x 92)
2. Panel thickness: 0.040 – 0.250 (1.0 – 6.4)
3. Mounting brackets lock in place for easy mounting
PROCESS INPUTS
The Sabre P meter is factory calibrated to accept 0-20, 4-20 mA, 0-5, 1-5, 0-10, and ±10 VDC. The meter can be scaled with or without applying an input signal for any display range required.
Current & Voltage Inputs
Setting up the meter to accept current or voltage input could not be easier. All setup is performed with the front panel buttons and there are no switches or jumpers to deal with. The removable screw terminal connectors are clearly labeled to prevent wiring errors.
 Transmitters Powered by Internal Supply (optional)
Current Overload Protection
To protect the meter from unexpected current overload the current input circuit contains an auto-resettable fuse. The fuse limits the current to a safe level when it detects a fault condition, and automatically resets itself when the fault condition is removed.
Connectors Location
 Meter with 24 V Transmitter Supply Option
OPTIONAL FIELD ENCLOSURES
The Sabre P process meter is available with a wide variety of NEMA 4, NEMA 4X, and explosion-proof enclosures.
NEMA 4 & NEMA 4X Enclosures
The NEMA 4 and NEMA 4X enclosures are available in stainless steel, steel, and plastic. They come with pre-punched 1/8 DIN cutouts for up to ten meters. The meters are mounted in the enclosure door so they can be programmed without opening the enclosure. Options include 2" pipe mounting kits and engraved plastic labels. Visit our website www.predig.com for complete details and specifications of the NEMA 4 & NEMA 4X Enclosures.
Low-Cost Plastic NEMA 4X Enclosure
 The PDA2801 is a low-cost, compact, plastic NEMA 4X enclosure that will house one digital panel meter.
Plastic, Steel & Stainless Steel
 These NEMA 4 & 4X enclosures house from one to ten digital panel meters and feature a hinged door. Enclosures and meters are ordered and packaged separately.
Engraved Plastic Labels
These custom engraved plastic labels are the perfect solution for identifying both the enclosure and labeling each individual meter
Whether the meters are mounted in one of our enclosures or installed into your existing control panel these custom engraved plastic labels are the answer you’re looking for!
Explosion-proof Enclosures
These explosion-proof enclosures house one or two meters and are UL & C-UL Classified as NEMA 4, 7 & 9 for location in Class I, Groups C & D; Class II, Groups E, F, G; and Class III. Enclosures and meters are ordered and packaged separately.
SPECIFICATIONS
Except where noted all specifications apply to operation at +25°C.
General
Display: 0.56" (14.2 mm) red LED, 4 digits (-1999 to 9999)
Front Panel: NEMA 4X, IP65; panel gasket provided
Programming Methods: Four front panel buttons
Display Update Rate: 5/sec
Overrange: Display flashes 9999
Underrange: Display flashes -1999
Recalibration:All inputs are calibrated at the factory; recalibration is recommended at least every 12 months
Max/Min Display: Stored until reset by user or meter is turned off
Password: Restricts modification of programmed settings
Non-Volatile Memory:Settings stored for a minimum of 10 years
Power Options: 85-265 VAC, 50/60 Hz; 90-265 VDC, 20 W max or 12-36 VDC; 12-24 VAC, 6 W max
Required Fuse:UL Recognized, 5 A max, slow-blow; up to 6 meters may share one fuse
Normal Mode Rejection: 64 dB at 50/60 Hz
Isolation: 4 kV input/output-to-power line; 500 V input-to-24 VDC supply
Operating Temperature: 0 to 65°C
Storage Temperature: -40 to 85°C
Relative Humidity: 0 to 90%
Connections:Removable screw terminal blocks accept 12 to 22 AWG. Note: RJ11 header for factory use only
Enclosure: 1/8 DIN, high impact plastic, 94V-0, color; gray
Weight: 8.5 oz (241 g)
UL File Number: E160849; 508 Industrial Control Equipment
Warranty: 1 year parts & labor
Extended Warranty: 1 or 2 years, refer to Price List for details
Process Inputs
Inputs: Field selectable: 0-20 mA, 4-20 mA, 0-5, 1-5 V, ±10 V
Accuracy: ±0.05% FS ±1 count
Function: Linear
Decimal Point: Up to 3 decimals: d.ddd, dd.dd, ddd.d, or dddd
Calibration: Scale without signal or calibrate with signal source
Calibration Range: User programmable over entire range of meter
Input Impedance:Voltage range: greater than 1 MΩ
Current Range: 50-100 Ω, varies with resettable fuse impedance
Input Overload: Protected by auto-resettable fuse
Temperature Drift: ±50 PPM/°C
Transmitter Supply: Isolated, P+, P-: 24 VDC ±10% @ 200 mA max
ORDERING INFORMATIONProducts
|
| Model
|
Description
|
Price
|
 Blue dot denotes item as a Quick Ship product
Please Note: The minimum order for the PD603 is 5 pieces. Please consider our Trident PD765 series when ordering in smaller quantities.
|
| PD603-6R0-0 |
|
Sabre P Low-Cost Process Meter; Powered from 85-265 VAC |
|
$149.00 |
 |
| PD603-6R0-1 |
|
Sabre P Low-Cost Process Meter; 24 V Transmitter Supply; Powered from 85-265 VAC |
|
$189.00 |
|
| PD603-7R0-0 |
|
Sabre P Low-Cost Process Meter; Powered from 12-36 VDC |
|
$199.00 |
|
|
|
Enclosures
|
|
|
| Model
|
Description
|
Price
|
| PDA2407 |
|
Plastic NEMA 4X Enclosure for 1 Meter (Any Type) |
|
$199.00 |
|
| PDA2411 |
|
Plastic NEMA 4X Enclosure for 2 Meter (Any Type) |
|
$274.00 |
|
| PDA2414 |
|
Plastic NEMA 4X Enclosure for 1 Type D + 1 Type A, B, C or E Meter |
|
$274.00 |
|
| PDA2501 |
|
Plastic NEMA 4X Enclosure for 1 Type C Meter |
|
$159.00 |
|
| PDA2502 |
|
Plastic NEMA 4X Enclosure for 2 Type C Meters |
|
$199.00 |
|
| PDA2503 |
|
Plastic NEMA 4X Enclosure for 3 Type C Meters |
|
$229.00 |
|
| PDA2504 |
|
Plastic NEMA 4X Enclosure for 4 Type A, B, C, or E Meters |
|
$334.00 |
|
| PDA2505 |
|
Plastic NEMA 4X Enclosure for 5 Type A, B, C, or E Meters |
|
$354.00 |
|
| PDA2506 |
|
Plastic NEMA 4X Enclosure for 6 Type A, B, C, or E Meters |
|
$374.00 |
|
| PDA2507 |
|
Plastic NEMA 4X Enclosure for 7 Type A, B, C, or E Meters |
|
$474.00 |
|
| PDA2508 |
|
Plastic NEMA 4X Enclosure for 8 Type A, B, C, or E Meters |
|
$514.00 |
|
| PDA2509 |
|
Plastic NEMA 4X Enclosure for 9 Type A, B, C, or E Meters |
|
$554.00 |
|
| PDA2510 |
|
Plastic NEMA 4X Enclosure for 10 Type A, B, C, or E Meters |
|
$584.00 |
|
| PDA2512 |
|
Plastic NEMA 4X Enclosure for 2 Type A, B, C, or E Meters |
|
$359.00 |
|
| PDA2522 |
|
Plastic NEMA 4X Enclosure for 1 Type D + 1 Type C Meter |
|
$344.00 |
|
| PDA2601 |
|
Stainless Steel NEMA 4X Enclosure for 1 Type C Meter |
|
$449.00 |
|
| PDA2602 |
|
Stainless Steel NEMA 4X Enclosure for 2 Type C Meters |
|
$504.00 |
|
| PDA2603 |
|
Stainless Steel NEMA 4X Enclosure for 3 Type C Meters |
|
$579.00 |
|
| PDA2604 |
|
Stainless Steel NEMA 4X Enclosure for 4 Type A,B, C or E Meters |
|
$734.00 |
|
| PDA2605 |
|
Stainless Steel NEMA 4X Enclosure for 5 Type A,B, C or E Meters |
|
$784.00 |
|
| PDA2606 |
|
Stainless Steel NEMA 4X Enclosure for 6 Type A,B, C or E Meters |
|
$839.00 |
|
| PDA2622 |
|
Stainless Steel NEMA 4X Enclosure for 1 Type D + 1 Type C Meter |
|
$499.00 |
|
| PDA2701 |
|
Steel NEMA 4 Enclosure for 1 Type C Meter |
|
$219.00 |
|
| PDA2702 |
|
Steel NEMA 4 Enclosure for 2 Type C Meters |
|
$314.00 |
|
| PDA2703 |
|
Steel NEMA 4 Enclosure for 3 Type C Meters |
|
$369.00 |
|
| PDA2704 |
|
Steel NEMA 4 Enclosure for 4 Type A, B, C, or E Meters |
|
$419.00 |
|
| PDA2705 |
|
Steel NEMA 4 Enclosure for 4 Type A, B, C or E Meters |
|
$474.00 |
|
| PDA2706 |
|
Steel NEMA 4 Enclosure for 5 Type A, B, C or E Meters |
|
$524.00 |
|
| PDA2722 |
|
Steel NEMA 4X Enclosure for 1 Type D + 1 Type C Meter |
|
$329.00 |
|
| PDA2801 |
|
Low-Cost Plastic NEMA 4X Enclosure for 1 Type C Meter |
|
$94.00 |
|
| PDA2811 |
|
Low-Cost Plastic NEMA 4X Enclosure for 1 Meter (Type A, B, C or E) |
|
$114.00 |
|
| PDA2812 |
|
Low-Cost Plastic NEMA 4X Enclosure for 2 Meters (Any type) |
|
$159.00 |
|
| PDA2821 |
|
Low-Cost Plastic NEMA 4X Enclosure for 1 Type D Meter + 1 Type A, B, C or E Meter |
|
$179.00 |
|
DOCUMENTATION
|
|
|
