DIGITAL PANEL METERS
ProVu |
PD6000: Dual-Line Process Meter |
|
 |
Features
- 0-20 mA, 4-20 mA, 0-5 V, 1-5 V, and ±10 V Inputs
- NEMA 4X, IP65 Front
- Universal 85-265 VAC or 12/24 VDC Input Power
- Large Dual-Line 6-Digit Display, 0.60" & 0.46"
- Isolated 24 VDC @ 200 mA Transmitter Power Supply
- Math Functions for Flow & Round Horizontal Tanks
- Programmable Displays & Function Keys
- Sunlight Readable Display
- 32-Point, Square Root, or Exponential Linearization
- Multi-Pump Alternation Control
- 2 or 4 Relays + Isolated 4-20 mA Output Options
- External 4-Relay & Digital I/O Expansion Modules
- RS-232, RS-422/485 Serial Communication Options
- -40 to 65°C Operating Temperature Range
|
The PD6000 ProVu is a full-featured, high end, 1/8 DIN digital process meter that represents the continuum of 34 years of development by Precision Digital Corporation. The most noticeable feature of the ProVu is its dual-line, 6-digit display that not only provides more data to the user, but makes it much easier to program than single line displays. Other key features include NEMA 4X front, 24 V transmitter power supply and 32-point linearization. Options include 2 or 4 relays and 4-20 mA output, expansion modules for 4 more relays, digital I/O, and serial communications, and DC power.
|
|
|
ProVu |
PD6200: Analog Input Dual-Line Flow Rate/Totalizer |
|
|
Features
- 0-20 mA, 4-20 mA, 0-5 V, 1-5 V, and ±10 V Inputs
- Isolated 24 VDC @ 200 mA Transmitter Power Supply
- Open Channel Flow with Programmable Exponent
- Square Root Extraction
- 32-Point Linearization
- Display Rate & Total at the Same Time
- Rate in Units per Second, Minute, Hour, or Day
- Total, Grand Total or Non-Resettable Grand Total
- Password Protection for Total Reset
- 9-Digit Totalizer with Total Overflow Feature
- Any Relay for Rate or Total
- 4-20 mA Output for Rate or Total
- Sampling Relay
- Total Stored in Non-Volatile Memory
|
The PD6200 is an 1/8 DIN digital panel meter specifically designed for displaying flow rate and total from a flow meter with an analog output such as 4-20 mA or 0-10 V. The PD6200 is particularly well-suited for flow applications because its six-digit, dual-line display can be programmed for a wide variety of display configurations. For instance, the upper line can display either flow rate, total or grand total, and the lower line can display either flow rate, total, grand total, or engineering units. Among other things, this makes it possible to display flow rate and total at the same time, a very unique feature on 1/8 DIN digital panel meters.
|
|
|
ProVu
|
PD6300: Pulse Input Dual-Line Flow Rate/Totalizer |
|
|
Features
- Pulse, Open Collector, NPN, PNP, TTL, Switch
- Contact, Sine Wave (Coil), Square Wave Inputs
- 5, 10 or 24 VDC Flowmeter Power Supply
- Gate Function for Rate Display of Slow Pulse Rates
- K-Factor, Internal Scaling, or External Calibration
- 4-20 mA Output Option Converts the Pulse Input to an Isolated 4-20 mA Output
- Display Rate & Total at the Same Time
- Rate in Units per Second, Minute, Hour, or Day
- Total, Grand Total or Non-Resettable Grand Total
- Password Protection for Total Reset
- 9-Digit Totalizer with Total Overflow Feature
- Any Relay for Rate or Total
- 4-20 mA Output for Rate or Total
- Sampling Relay
- Total Stored in Non-Volatile Memory
|
The ProVu model PD6300 is an 1/8 DIN digital panel meter specifically designed for displaying flow rate and total from a pulsed input provided by open collector, NPN, PNP, TTL, switch contact, sine wave, or square wave. The PD6300 is particularly well-suited for flow applications because its six-digit, dual-line display can be programmed for a wide variety of display configurations. For instance, the upper line can display either flow rate, total or grand total, and the lower line can display either flow rate, total, grand total, or engineering units. Among other things, this makes it possible to display flow rate and total, or total and grand total at the same time, a very unique feature on 1/8 DIN digital panel meters.
|
|
|
TRIDENT |
PD765: Process & Temperature Meter |
The Model PD765 Trident digital panel meter is one of the most versatile digital panel meters on the market and will satisfy a wide variety of process applications. The Trident can be field programmed to accept process voltage (0-5V, 1-5V, etc) and current (4-20 mA) inputs, 100 Ohm RTDs, and the four most common thermocouples. It is housed in a shallow-depth, 1/8 DIN enclosure that features a NEMA 4X front panel and convenient mounting hardware. There are two power options for the Trident: 85 to 265 VAC or 12-36 VDC and it can provide 24 VDC to power the transmitter if needed. Programming and setup can be performed with the four front panel pushbuttons, free MeterView software, or using the Copy function.
The display height on the standard Trident meter is 0.56" (14.2 mm) and on the Trident X2 the supersized display height is an astounding 1.2" (30.5 mm). The Trident X2 can be read easily from distances of up to 30 feet! Both meters are available with all Trident features. The intensity of the display on both versions of the Trident can be adjusted to compensate for various lighting conditions, including direct sunlight.
|
|
|
SABRE T |
PD743: Sabre T Low-Cost Temperature Meter |
 |
 |
Features
- J, K, T, E Thermocouple & 100 Ω Pt RTD
- Pre-Calibrated for All Input Types
- NEMA 4X, IP65 Front
- Shallow Depth 1/8 DIN Case 3.2” Behind Panel
- 4 Digit Display, 0.56” (14 mm) High, Red LEDs
- Easy Front Panel Programming
- Maximum/Minimum Display
- Universal Power Supply 85-265 VAC
- 12-36 VDC/12-24 VAC Power Option
|
Look to the Sabre T temperature meter for the key features you want and don't worry about getting bogged down in a confusing array of things you don't need. The Sabre T provides all the utility needed to handle your application with accuracy and simplicity.
|
|
|
SABRE P |
PD603: Sabre P Low-Cost Process Meter
|
 |
|
Features
- 0-20, 4-20 mA, 0-5, 1-5, 0-10, ±10 V Inputs
- Input Current Overload Protection
- NEMA 4X, IP65 Front
- Shallow Depth 1/8 DIN Case 3.6" Behind Panel
- 4 Digit Display, 0.56” (14 mm) High, Red LEDs
- Easy Front Panel Programming
- Scale without a Signal Source
- Calibrate with a Signal Source
- Maximum/Minimum Display
- Universal Power Supply 85-265 VAC
- 12-36 VDC/12-24 VAC Power Option
- 24 VDC @ 200 mA Transmitter Supply Option
|
Look to the Sabre P process meter for the key features you want and don't worry about getting bogged down in a confusing array of things you don't need. The Sabre P provides all the utility needed to handle your application with accuracy and simplicity.
|
|
|
SNOOPER |
PD865: Snooper Serial Input Modbus Meter |
 |
 |
Features
- RS-485 Modbus® RTU input
- Six full digits 999,999
- Sunlight readable led display
- Scale in engineering units
- 16-point linearization
- Square root & programmable exponent
- Exact display of input data
- 4-20 ma analog output option
- Two Form a 3 a relays standard
- Two Form C 3 a relays option
- Up to four pump alternation control
- Universal power supply
|
Expand the capability of other Modbus RTU serial devices with the new PD865 Snooper. It has a six-digit sunlight readable display and may be set up as a master or slave. The PD865 comes with RS-485 communications, two relays standard, and up to four relays plus one 4-20 mA output.
Now, in addition to functioning as a Master or Slave device, the PD865 Modbus Serial Input Meter can function in Snooper mode. After some simple configuration a PD865 can be placed in Snooper mode where it is neither a Master nor a Slave. In this mode, the Snooper “listens” to Modbus traffic and “grabs” the data associated with a specific Modbus address and register number. It does this without detection by, or interfering with, the master or slaves on the network. Then it displays that data on a sunlight readable 6-digit LED display
|
|
|
JAVELIN D |
PD644: Javelin D High-Voltage DC Meter
|
 |
|
Features
- 0-300 VDC input
- NEMA 4X, IP65 front
- Scale in engineering units
- Sunlight readable LED display
- 4-20 mA analog output
- Two form C 3 A relays option
- RS-485 serial communications
- Modbus® RTU option
- Data acquisition with MeterView®
|
The Javelin Max/Min function, two relays, and serial communication options provide all the utility you need to handle all the common applications.
|
|
|
PD690 |
PD690: Process Meter
|
 |
|
Features
- 4-20 mA, 0-5 V, 0-10 V inputs
- NEMA 4X, IP65 front panel
- 0.56" (14.2 mm) red LED display
- 4½ digits + extra zero
- 11-point linearization
- Square root function
- 115 VAC or 230 VAC power
- 24 V transmitter power supply standard
- 2 or 4 relays + 4-20 mA output options
|
The PD690 is a high performance, easy to use, industrial-grade microprocessor-based digital process meter. It accepts all standard process signals (4-20 mA, 1-5 V, & 0-10 V) and displays these signals in engineering units on a 4½ digit display. The display includes an extra zero, which may be used to handle numbers up to 199,990. The meter also provides 24 VDC to power the transmitter. Options include 2 or 4 relays and an Isolated 4-20 mA Transmitter Output.
|
|
|
PD691 |
PD691: Strain Gauge/Load Cell Meter |
 |
|
Features
- 0-30 mV, 0-200 mV, ±15 mV, ±100 mV inputs
- 5, 10, or 24 VDC field selectable excitation
- NEMA 4X, IP65 front panel
- 0.56" (14.2 mm) red LED display
- 4½ digits + extra zero
- Max display or peak hold feature
- Capture or programmable tare function
- 115 VAC or 230 VAC power
- 2 or 4 relays + 4-20 mA output option
|
The PD691 is a high performance, industrial-grade 4½ digit Strain Gauge Meter. It accepts all the standard strain gauge and load cell signals: 0-30 mV, 0-200 mV, ± 15 mV and ± 100 mV and displays these signals in engineering units on a 4½ digit display. The display also includes an extra zero which may be used to handle numbers up to ±199,99(0).
|
|
|
PD693 |
PD693: Pulse Input Flow Rate/Totalizer/Batcher |
 |
|
Features
- Pulse, open collector, NPN, PNP, TTL, switch contact, square wave inputs
- 12 VDC @ 50 mA or 24 VDC @ 20 mA excitation
- Gate function for rate display of slow pulse rates
- K-Factor, internal or external calibration
- 4-20 mA output option converts the pulse
input to an isolated 4-20 mA output
|
The PD693 is a six digit rate/totalizer/batch controller used to display flow rate and total, control automatic or manual batching, and provide various higher level functions including programmable root extraction and pump alternation control. The PD693 accepts pulse, square wave, and 0-5 V or 0-12 V @ 30 kHz inputs.
|
|
|
PD750
|
PD750: Temperature Meter |
 |
|
Features
- Thermocouple & RTD inputs
- Type J,K,T,E,R,S TC & 100 Ω platinum RTD
- 10 Ω copper RTD
- 120 Ω nickel RTD
- Factory calibrated for all Inputs
- Display ºC or ºF
- NEMA 4X, IP65 front
- 115 VAC, 230 VAC, or 24 VDC power
- 2 or 4 relays & 4-20 mA output option
|
Precision Digital Temperature Meters handle temperature displaying, alarming and re-transmitting applications with simplicity, accuracy and reliability. These meters are available with up to 4 relays, isolated 4-20 mA output, and are factory calibrated for easy field selection of the thermocouple or RTD type. Just select your input type (J,K,T,E,R,S thermocouple, 100Ω RTD, 10Ω copper, or 120Ω nickel), and either Fahrenheit or Celsius and connect the sensor.
|
|
|
|
